Antiskid steering sensor warning

markconnor · Sep 18th, 2019, 20:51

Sorry to ask this one as I see it's a popular one

Anyone help point me towards the most likely components needed

I've plugged Vida in and got the following non reset able errors;
BCM0109 communication between communicating control units SAS internal fault
BCM0115 communication between communicating control units SAS signal missing
SAS 0024 steering angle sensor signal missing

Can I run any tests on vida or other test gear to determine exactly what's needed

northernblue · Sep 19th, 2019, 20:10

Quote:

Originally Posted by markconnor

Sorry to ask this one as I see it's a popular one

Anyone help point me towards the most likely components needed

I've plugged Vida in and got the following non reset able errors;
BCM0109 communication between communicating control units SAS internal fault
BCM0115 communication between communicating control units SAS signal missing
SAS 0024 steering angle sensor signal missing

Can I run any tests on vida or other test gear to determine exactly what's needed

The only time i had an anti skid warning was on my old s60 ,which turned out to be the cv joint.

ma70 · Sep 20th, 2019, 21:44

May not be pertinent here, but I believe the Climate control's Air Quality Sensor can cause various CAN communication issues if faulty/not an original part.

Thassos · Sep 21st, 2019, 05:56

The sas module is behind the steering wheel, you can get occasional errors which usually reset themselves and usually when your moving the steering full lock, from a vague guess perhaps something has come adrift with the connection to the sas, have you tried taking the wheel off to have a look ?, could be the module is dead, theyre about £200 ish , i had mine replaced some years back after more persistent error messages, and there is a recal routine that needs running from vida if you replace the module..

markconnor · Sep 22nd, 2019, 19:21

Problem now solved.

I bought a replacement clockspring, complete with the SAS on the back.

Turns out the previous owner had bought and fitted 2 clocksprings without the SAS, so no wonder it was seeing an error.

Correct part fitted, and reset everything with my code reader, and bingo....No Antiskid warning.

ANDY V70 D5 SPORT · Sep 22nd, 2019, 19:51

Hope you don't mind me asking was the SAS expensive from volvo?

Sep 18th, 2019, 20:51	#1
markconnor New Member Last Online: Aug 10th, 2020 08:05 Join Date: Sep 2019 Location: Selby	Antiskid steering sensor warning Sorry to ask this one as I see it's a popular one Anyone help point me towards the most likely components needed I've plugged Vida in and got the following non reset able errors; BCM0109 communication between communicating control units SAS internal fault BCM0115 communication between communicating control units SAS signal missing SAS 0024 steering angle sensor signal missing Can I run any tests on vida or other test gear to determine exactly what's needed

Sep 20th, 2019, 21:44	#3
ma70 Curmudgeon with a turbo Last Online: Jul 1st, 2020 17:48 Join Date: Nov 2014 Location: Congleton	May not be pertinent here, but I believe the Climate control's Air Quality Sensor can cause various CAN communication issues if faulty/not an original part. __________________ (current) '06 P2 S80 D5 SE LUX, Met. Gold/Black leather, 200k (past)'99 P1.5 V40 SE 1.8 (1731cc), Metallic Peacock Blue-Green, Black Leather, Winter Pack. 101k (past) '88 340 GL 1.7, gifted to me with "slipping clutch" that was a sticky linkage

Sep 21st, 2019, 05:56	#4
Thassos GoldMember Last Online: Apr 14th, 2024 10:10 Join Date: Jul 2010 Location: Kent, UK	s a s The sas module is behind the steering wheel, you can get occasional errors which usually reset themselves and usually when your moving the steering full lock, from a vague guess perhaps something has come adrift with the connection to the sas, have you tried taking the wheel off to have a look ?, could be the module is dead, theyre about £200 ish , i had mine replaced some years back after more persistent error messages, and there is a recal routine that needs running from vida if you replace the module..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Sep 22nd, 2019, 19:21	#5
markconnor New Member Last Online: Aug 10th, 2020 08:05 Join Date: Sep 2019 Location: Selby	Problem now solved. I bought a replacement clockspring, complete with the SAS on the back. Turns out the previous owner had bought and fitted 2 clocksprings without the SAS, so no wonder it was seeing an error. Correct part fitted, and reset everything with my code reader, and bingo....No Antiskid warning.

Sep 22nd, 2019, 19:51	#6
ANDY V70 D5 SPORT Senior Member Last Online: Apr 12th, 2024 21:36 Join Date: Jun 2010 Location: Shropshire	Hope you don't mind me asking was the SAS expensive from volvo?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)