Stalling forward but not in reverse

adamp1917 · Dec 26th, 2022, 14:21

V40 D3 2013

Bit of an odd one this!?

Just had timing belt changed along with rear brake discs and pads, front coil spring and annual oil and filter change. Had no problems for around a week until during an energetic acceleration the car started stuttering. Got home but now the car will not pull away - when letting the clutch out the engine simply cuts.

Initial thoughts was a fuel delivery problem or clutch until I discovered that the car drives perfectly fine in reverse?! Plenty of power too - handbrake on and the engine will pull away in reverse against the brake.

Engine revs normally, sounds very smooth, no abnormal sound or vibrations. Checked under the bonnet for loose plugs in and around the timing belt area, other than the cover not being replaced correctly everything looks fine as far as I can see.

Any suggestions welcome - hoping somebody may have experienced this one before?

Dec 26th, 2022, 14:21	#1
adamp1917 New Member Last Online: Apr 11th, 2024 00:19 Join Date: Dec 2022 Location: Newcastle upon Tyne	Stalling forward but not in reverse V40 D3 2013 Bit of an odd one this!? Just had timing belt changed along with rear brake discs and pads, front coil spring and annual oil and filter change. Had no problems for around a week until during an energetic acceleration the car started stuttering. Got home but now the car will not pull away - when letting the clutch out the engine simply cuts. Initial thoughts was a fuel delivery problem or clutch until I discovered that the car drives perfectly fine in reverse?! Plenty of power too - handbrake on and the engine will pull away in reverse against the brake. Engine revs normally, sounds very smooth, no abnormal sound or vibrations. Checked under the bonnet for loose plugs in and around the timing belt area, other than the cover not being replaced correctly everything looks fine as far as I can see. Any suggestions welcome - hoping somebody may have experienced this one before?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)