|
S40 / V50 '04-'12 / C70 '06> / C30 '07-'12 General Forum for the S40 / V50 '04> / C70 '06> /C30 '07> models. |
![]() |
|
C70 Front Wishbone Ball Joint SizeViews : 111 Replies : 1Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
It's just a name!
Last Online: Yesterday 20:01
Join Date: Oct 2010
Location: Coningsby, Lincolnshire
|
![]()
I am looking to replace the front wishbones on my 2010 2.0D C70.
I have some heavy juddering under braking and the front end generally feels a bit ‘scatty’. I am pretty confident it’s the wishbone bushes, but rather than just change the bushes I thought I would do the whole wishbone and then refurb the old ones on the bench with poly bushes when I get the time (plan would be to poly bush the whole car, but that iscost prohibitive right now). There seems to be two ball joint sizes, 18mm and 21mm, I can find plenty of info relating to S40/V50 chassis numbers and the relevant sizes, but nothing about the C70. I have an inkling that the C70 is only 21mm but I could be wrong, is somebody able to confirm for me please? I did put my reg in a couple of motorfactor sites but have had conflicting results. Cheers in advance
__________________
Current: 2010 C70 2.0 SE Lux Previous: 2004 V40 2.0 Sport Classic Founder member of the X40 In Dash Cup Holder Owners Club 😋 |
![]() |
![]() |
![]() |
#2 |
Senior Member
Last Online: Feb 14th, 2019 20:49
Join Date: Feb 2011
Location: Neath
|
![]()
My 2008 C70 D5 is 21mm. Couldn't get a ball joint splitter that was big enough anywhere locally, so ended up getting off ebay.
|
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|