volvo inflatable curtain resistance too high

[edinburger]

c70 2006 T5

SRS airbag light on

volvo inflatable curtain resistance too high right 0055

how to fix it plz.

Thanks

[mypaulra]

Hi have you seen this, similar issue on C70 in the US:

https://www.justanswer.com/volvo/ba9...ance-high.html

[edinburger]

if i disconnect power going to dull door, basically unplug connector near hinges and then reset code would thi shelp ?

[SwissXC90]

Inspect every loom connector in the airbag circuit of the airbag with the problem Clean connectors with contact cleaner. Ensure pins grip well

[Clan]

Originally Posted by SwissXC90

Inspect every loom connector in the airbag circuit of the airbag with the problem Clean connectors with contact cleaner. Ensure pins grip well

The pins should be gold plated ... if not you can order 4 new gold plated Air bag terminals for the door plug ..

[edinburger]

is this all under seat or behind door card ? thanks

[Clan]

Originally Posted by edinburger

is this all under seat or behind door card ? thanks

it's that connector between door and Door post , it unplugs after sliding up the locking piece .

[edinburger]

Originally Posted by Clan

it's that connector between door and Door post , it unplugs after sliding up the locking piece .

you mean like this thing ?

see pic plz

[Clan]

Originally Posted by edinburger

you mean like this thing ?

see pic plz

ahh you have an early model before they fitted a plug !
you need to do the tests , there is a volvo resistor tool which plugs in instead of the Air bag .. if the fault goes away there is an air bag problem, if you still have the fault wiring tests need to take place between air bag plug and SRS module plug , resistance of wires need checking ...

You could have a broken wire in the place in your picture where the cable moves when you open the door .

[edinburger]

Originally Posted by Clan

ahh you have an early model before they fitted a plug !
you need to do the tests , there is a volvo resistor tool which plugs in instead of the Air bag .. if the fault goes away there is an air bag problem, if you still have the fault wiring tests need to take place between air bag plug and SRS module plug , resistance of wires need checking ...

You could have a broken wire in the place in your picture where the cable moves when you open the door .

sorry i was not very clear, i do have a plug. pic is just google image. i used it to give an example. plug i have does come off.

so i should take that plug off and clean contacts yea ?

Thanks Clan