|
140/164 Series General Forum for the Volvo 140 and 164 cars |
Information |
|
Rear Bumper Bolt SizesViews : 564 Replies : 3Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jun 13th, 2011, 17:14 | #1 |
Member
Last Online: May 21st, 2024 23:37
Join Date: Feb 2010
Location: Portsmouth
|
Rear Bumper Bolt Sizes
Hi Guys,
Whilst looking around the car before taking it for a run I noticed that the restorers have only put the rear bumper on with two bolts. This is despite me giving them all the original bolts when I gave them the bumper back. Anyway, I was wondering if someone knew the size of the bolts that go into the bumper from inside the car so that I can replace them. Or if some kind soul could measure them for me. PS. Took it for a test drive anyway, with a new clutch, flushed out system, new thermostat, 4 new pads and 4 new discs it was a fantastic. |
Jun 13th, 2011, 18:39 | #2 |
Experienced Member
Last Online: Yesterday 23:45
Join Date: Jun 2007
Location: L/H side
|
if it is before 1974 model it is UNC threads probably 3/8" If after 1974 with the big bumpers they are metric ...
__________________
My comments are only based on my opinions and vast experience . |
Jun 13th, 2011, 21:34 | #3 |
Member
Last Online: May 21st, 2024 23:37
Join Date: Feb 2010
Location: Portsmouth
|
Thanks, that is really helpful, I should have said that it was a '71.
|
Jun 13th, 2011, 21:48 | #4 |
Experienced Member
Last Online: Yesterday 23:45
Join Date: Jun 2007
Location: L/H side
|
Thats ok , They went metric except for just one bolt the sump plug! That remained at
1" AF until the 940 disappeared in 1998 !
__________________
My comments are only based on my opinions and vast experience . |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|