4x18" alloys with tyres for sale

[Kev0607]

Reduced to £275.

[Kev0607]

Originally Posted by barrybritcher

I would have had them but turns out I would need to pay to have the bores drilled out to fit p2

I think your hub is 65.1 & the hub on my S80 is 63.4. Could you use spigot rings (65.1 outside diameter reducing to 63.4 internal)? They seem to be a cheap option nowadays to save the hassle of getting the bores drilled? They're about £5 on Ebay.

Here's a link to a set as an example:

https://www.ebay.co.uk/i/15257801487...SABEgLXkfD_BwE

[Kev0607]

Now £250.

[barrybritcher]

No those spigots are for the other way around. To fit my wheels to your car

[Kev0607]

Ahh okay... That makes sense.

[Kev0607]

Now reduced to £225. I need the space & these are a bargain!

[Kev0607]

Originally Posted by barrybritcher

No those spigots are for the other way around. To fit my wheels to your car

What size is your hub? They alloys I'm selling have 73.1mm centre bores. Priced at £225 now, but I'm open to sensible offers in & around that figure if you're still interested.

[barrybritcher]

65.1mm on mine so yes would fit with spigots

[barrybritcher]

what is the type of aptany tyre (model no) I will only fit A or B rated grip

[Kev0607]

Hi,

I had a look at the tyres & they all have the following on them: Aptany RA301 245 40 R18 97W XL

The tyres are practically new, so they should do many miles before you need to consider changing them - I think they’re ‘C’ rated if I recall correctly. However, the set I’m selling are cheap as they are & you could run these tyres for a while & change them for another brand at a later date if you wanted. The set of tyres alone cost me more than what I’m looking to sell them with the alloys for! I found the tyre grip fine for everyday/normal driving & they aren’t too noisy either.

I have no use for them now & its a shame to leave them lying around unused. I’ve priced them for a quick sale, but I’m open to sensible offers all the same.