Anti skid message, wipers on, indicators not working. - Page 2

S402002 · Dec 1st, 2018, 19:08

my friend had the same issue with his s40 2004, some kind of drain system from ac was clogged and water dripped into cem/fuse box. It caused same problems with antiskid and wipers on.

andy_d · Dec 2nd, 2018, 12:35

Quote:

Originally Posted by S402002

my friend had the same issue with his s40 2004, some kind of drain system from ac was clogged and water dripped into cem/fuse box. It caused same problems with antiskid and wipers on.

that would be the SUN ROOF drains being blocked and leaking into the cabin Not the a/c drain

Sforty · Dec 10th, 2018, 18:38

Quote:

Originally Posted by pacman67

I know what it is. Under the glove box drop down the CEM board a white tray with fuses and relays. Disconnect your battery then methodically remove treat with contact cleaner and refit all connectors and push home all fuses. You should then be OK.

I have the same problem on my 2008 S40 2.0D. I've noticed it only ever happens when someone/something accidentally kicks the front of the passenger footwell. It must dislodge a wire/connection. I stick my hand under and make sure that everything is 'in place' and the message disappears.

Not the best advice but seems to support Pacman's solution.

Mbailz85 · Mar 26th, 2019, 08:30

Just a quick one to say the problem was fixed.
Had no choice at the time but to take it the local Volvo specialists. Vida check done and £170 later.
Bloke said it was the cemetery module and all he did was take it out and clean it with contact cleaner.

If I'd have seen the post saying that earlier would have done it myself.

Just happy it's fixed.

Zebster · Mar 26th, 2019, 08:41

Quote:

Originally Posted by Mbailz85

Just a quick one to say the problem was fixed.
Had no choice at the time but to take it the local Volvo specialists. Vida check done and £170 later.
Bloke said it was the cemetery module and all he did was take it out and clean it with contact cleaner.

If I'd have seen the post saying that earlier would have done it myself.

Just happy it's fixed.

Cemetery module?

Mbailz85 · Mar 26th, 2019, 09:16

God damn auto type.

I mean CEM module

Eakin · Aug 20th, 2019, 13:09

Just had the same problem happen to me yesterday (wipers on, traction control error, no back wiper control, no signals, etc.). I pulled the wiper fuse until I had a chance to look in to it properly. I ended up just opening up the CEM and reseating everything. It all went back to normal after that.

Hopefully that also fixes the issue I've been having of my wipers turning on for a cycle when I hit a hard bump.

gobofraggle · Jan 3rd, 2020, 10:52

I have a similar issue on my 2009 C70 with the anti skid message, wipers on constantly, indicators not working. I also have a few extra issues where the heater controls do not work, i cannot set the cabin temperature or redirect the air from the windscreen to the footwell for example, also the cabin preheater is stuck on so the battery drains in around an hour or 2 (brand new battery).

Ive removed the CEM module and cleaned all the contacts, visually checked for any signs of corrosion and still have the issue.

I then sent the board off to volvodiagnostic for replacement and that has not solved the issue.

I systematically checked all the connectors in the plugs that i can, which all look clean, and visually they all look good.

Its looking like i will have to bite the bullet and take it for a visit to volvo unless anyone has any further ideas?

BertD · Jun 24th, 2022, 12:50

FWIW I got the exact same symptoms yesterday (V50, '10): I'd just bled the brakes and was taking a trip round the block, testing the brakes with increasing enthusiasm. After about a mile: "anti-skid service required", wipers on and indicators not working. (I don't know if anything else wasn't working).

I went home, found this thread, and this morning went out armed with contact cleaner. The message had gone and the wipers and indicators are working as normal.

I cleaned the contacts anyway, just for good measure.

Ashmere · Jun 24th, 2022, 13:39

Not necessarily, as /\ says the only real way to diagnose is Volvo dealer as they have the proper Vida equipment which most indy's won't have,
Could be expensive if its the main ECM £900, brake module £600, others £???
Hopefully it's neither and it's a cheap fix.

Dec 1st, 2018, 19:08	#11
S402002 Junior Member Last Online: Sep 4th, 2019 15:42 Join Date: May 2017 Location: So'ton	my friend had the same issue with his s40 2004, some kind of drain system from ac was clogged and water dripped into cem/fuse box. It caused same problems with antiskid and wipers on.

Mar 26th, 2019, 08:30	#14
Mbailz85 New Member Last Online: Dec 30th, 2020 12:36 Join Date: Mar 2016 Location: Wirral	Just a quick one to say the problem was fixed. Had no choice at the time but to take it the local Volvo specialists. Vida check done and £170 later. Bloke said it was the cemetery module and all he did was take it out and clean it with contact cleaner. If I'd have seen the post saying that earlier would have done it myself. Just happy it's fixed.

Mar 26th, 2019, 09:16	#16
Mbailz85 New Member Last Online: Dec 30th, 2020 12:36 Join Date: Mar 2016 Location: Wirral	God damn auto type. I mean CEM module

Aug 20th, 2019, 13:09	#17
Eakin New Member Last Online: Jan 30th, 2024 18:50 Join Date: Jan 2012 Location: Toronto, ON	Just had the same problem happen to me yesterday (wipers on, traction control error, no back wiper control, no signals, etc.). I pulled the wiper fuse until I had a chance to look in to it properly. I ended up just opening up the CEM and reseating everything. It all went back to normal after that. Hopefully that also fixes the issue I've been having of my wipers turning on for a cycle when I hit a hard bump.

Jan 3rd, 2020, 10:52	#18
gobofraggle New Member Last Online: Jan 3rd, 2020 10:52 Join Date: Jan 2020 Location: BLACKPOOL	I have a similar issue on my 2009 C70 with the anti skid message, wipers on constantly, indicators not working. I also have a few extra issues where the heater controls do not work, i cannot set the cabin temperature or redirect the air from the windscreen to the footwell for example, also the cabin preheater is stuck on so the battery drains in around an hour or 2 (brand new battery). Ive removed the CEM module and cleaned all the contacts, visually checked for any signs of corrosion and still have the issue. I then sent the board off to volvodiagnostic for replacement and that has not solved the issue. I systematically checked all the connectors in the plugs that i can, which all look clean, and visually they all look good. Its looking like i will have to bite the bullet and take it for a visit to volvo unless anyone has any further ideas?

Jun 24th, 2022, 12:50	#19
BertD New Member Last Online: Jun 24th, 2022 12:50 Join Date: Jun 2022 Location: Suffolk	FWIW I got the exact same symptoms yesterday (V50, '10): I'd just bled the brakes and was taking a trip round the block, testing the brakes with increasing enthusiasm. After about a mile: "anti-skid service required", wipers on and indicators not working. (I don't know if anything else wasn't working). I went home, found this thread, and this morning went out armed with contact cleaner. The message had gone and the wipers and indicators are working as normal. I cleaned the contacts anyway, just for good measure.

Jun 24th, 2022, 13:39	#20
Ashmere Junior Member Last Online: Oct 12th, 2022 17:52 Join Date: May 2022 Location: Peterborough	Not necessarily, as /\ says the only real way to diagnose is Volvo dealer as they have the proper Vida equipment which most indy's won't have, Could be expensive if its the main ECM £900, brake module £600, others £??? Hopefully it's neither and it's a cheap fix.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)