Stainless big bore 940/740 turbo exhaust

[readview]

Hi all,
I have for sale a complete exhaust (powerflow) in stainless to fit the 940/740 turbo models,it's a rather bigger bore than standard and has only the cat and rear box so will have a deeper and louder tone than a stock item.It is all one long length so shipping is not really on the cards although we could deliver it for a cost if it's not too far away.
£150

[360beast]

What's the diameter and does it fit a 13c turbo?

[readview]

Hi,it's 21cm circumference approx.,tailpipe is approx. 64mm diameter although diameter does look to vary slightly along the length of the exhaust,the front ed I have taken a pic of with a measure for reference so that will hopefully clarify the turbo question.It looks like a normal turbo frontpipe flange to me.

[360beast]

Originally Posted by readview

Hi,it's 21cm circumference approx.,tailpipe is approx. 64mm diameter although diameter does look to vary slightly along the length of the exhaust,the front ed I have taken a pic of with a measure for reference so that will hopefully clarify the turbo question.It looks like a normal turbo frontpipe flange to me.

Looks like it might be a standard 2.25" diameter.

Sadly I'm after a 3" system but thanks for the reply

[daveo2002]

I would like to buy. Pmd.

[readview]

Now sold,thank you all for your interest.