|
700/900 Series General Forum for the Volvo 740, 760, 780, 940, 960 & S/V90 cars |
Information |
|
740 Rear interior window sealViews : 470 Replies : 1Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jun 9th, 2018, 22:37 | #1 |
Member
|
740 Rear interior window seal
I have one of the rear passenger door panels off, and need to remove the thick interior rubber seal from the rear passenger door window, the small fixed one to treat some rust ,just wondered if there is a way to do this, have tried levering it out , bit it will not move, Thanks
|
The Following User Says Thank You to panda529e699 For This Useful Post: |
Jun 10th, 2018, 12:55 | #2 |
Premier Member
Last Online: Apr 15th, 2024 09:22
Join Date: May 2012
Location: Lakenheath
|
Peel back the door seal on the top of the door just above the top of the divider bar between the fixed 1/4 light widow and the main opeingin window.
You'll see a pop rivet. Immediately blow the divider bar on the door inside should be another pop rivet. To remove the divider bar and then both panes of glass, those pop rivets need drilling out and then obviously new ones fitted at the end of the job.
__________________
Cheers Dave Next Door to Top-Gun with a Honda CR-V & S Type Jag Volvo gone but not forgotten........ |
The Following 2 Users Say Thank You to Laird Scooby For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|