TCM Vida codes Engine Torque Signal + Throttle/Pedal Signal

Vrunner · Mar 30th, 2017, 21:07

Hi,

Got my first DTCs in Transmission Control Module (TCM) after reading my xc90 with vida.

TCM-P171900 Engine Torque Signal
TCM-P193B00 Throttle/Pedal Signal

These are new, have erased all few weeks ago. Car does seem sluggish to accelerate,.

Has anyone experienced these codes? What can be at fault?
Can turbo issues also contribute?

Thanks.

Tannaton · Mar 30th, 2017, 22:01

Quote:

Originally Posted by Vrunner

Hi,

Got my first DTCs in Transmission Control Module (TCM) after reading my xc90 with vida.

TCM-P171900 Engine Torque Signal
TCM-P193B00 Throttle/Pedal Signal

These are new, have erased all few weeks ago. Car does seem sluggish to accelerate,.

Has anyone experienced these codes? What can be at fault?
Can turbo issues also contribute?

Thanks.

Never seen those before (not that I am the most experienced....) what does VIDA suggest as next diagnostic process?

Vrunner · Mar 30th, 2017, 22:10

Quote:

Originally Posted by Tannaton

Never seen those before (not that I am the most experienced....) what does VIDA suggest as next diagnostic process?

How can I see the next steps in Vida?

I tried clicking on errors, and only extra bit on info was "related CSC" list - are these the next steps? If so, clicking on them did nothing.

As a disclaimer, i am new to vida and still learning.

cheshired5 · Mar 30th, 2017, 22:12

Everyone who buys Vida from me can contact me anytime for guidance so perhaps have a word with your seller.

Rooster · Mar 30th, 2017, 22:56

Has the fault come back after been erased??

If so engine torque is set because TCM recieved an invalid signal from ECM in relation to how much torque it was producing,

Usually set when say its got something it has an issue which as it set a code for throttle pedal aswell looks like that if there is no other codes stored,

Vrunner · Mar 31st, 2017, 07:17

Have not erased them yet.

Attached is the screenschot of the codes.

SwissXC90 · Mar 31st, 2017, 07:54

Quote:

Originally Posted by Vrunner

How can I see the next steps in Vida?

As a disclaimer, i am new to vida and still learning.

A good start when you are not familiar with VIDA is to read the VIDA Help file
http://www.autoscaners.ru/data/volvo...Help-en-GB.pdf

It includes screenshots and tells you what everything means, and how to use VIDA

Tannaton · Mar 31st, 2017, 08:49

Quote:

Originally Posted by Vrunner

How can I see the next steps in Vida?

I tried clicking on errors, and only extra bit on info was "related CSC" list - are these the next steps? If so, clicking on them did nothing.

As a disclaimer, i am new to vida and still learning.

I can't actually remember in sufficient detail to talk you through it as it's been a few months since I've had to use it but there is a way of getting an explanation, common associated symptoms and further diagnosis. But this is just part of the value of VIDA, it's so much more than a plug in diagnostic.

I'll have a look over the weekend as I need to reset the service reminder on er indoors V50...

neworleans · Jun 18th, 2018, 23:43

Hi Vrunner,

Were you able to correct the issue with the code TCM-P171900 Engine Torque Signal?
I am getting the same code and not sure what to do with it. If you were able to fix it please share. Thanks.

64ponty · Nov 29th, 2018, 23:29

Reviving the thread

Has anyone sorted these codes? My 2014 xc90 DRawd just came up with them as well.

Mar 30th, 2017, 21:07	#1
Vrunner Junior Member Last Online: Dec 28th, 2017 07:34 Join Date: Mar 2016 Location: Eu	TCM Vida codes Engine Torque Signal + Throttle/Pedal Signal Hi, Got my first DTCs in Transmission Control Module (TCM) after reading my xc90 with vida. TCM-P171900 Engine Torque Signal TCM-P193B00 Throttle/Pedal Signal These are new, have erased all few weeks ago. Car does seem sluggish to accelerate,. Has anyone experienced these codes? What can be at fault? Can turbo issues also contribute? Thanks.

Mar 30th, 2017, 22:12	#4
cheshired5 Premier Member Last Online: Dec 26th, 2021 13:42 Join Date: Dec 2013 Location: Crewe	Everyone who buys Vida from me can contact me anytime for guidance so perhaps have a word with your seller. __________________ 2002 S60 SE D5 Manual 209000 miles

Mar 30th, 2017, 22:56	#5
Rooster Speed freak Last Online: Apr 3rd, 2020 22:04 Join Date: Nov 2003 Location: Yorkshire	Has the fault come back after been erased?? If so engine torque is set because TCM recieved an invalid signal from ECM in relation to how much torque it was producing, Usually set when say its got something it has an issue which as it set a code for throttle pedal aswell looks like that if there is no other codes stored, __________________ 04 XC90 D5 --- Big bus 00 pug 306HDi --- Run about 88 pug 309GTi --- Project track car 07 CB600 Hornet --- 2 wheel fun

Jun 18th, 2018, 23:43	#9
neworleans New Member Last Online: Jun 18th, 2018 23:43 Join Date: Jun 2010 Location: New Orleans	Hi Vrunner, Were you able to correct the issue with the code TCM-P171900 Engine Torque Signal? I am getting the same code and not sure what to do with it. If you were able to fix it please share. Thanks.

Nov 29th, 2018, 23:29	#10
64ponty New Member Last Online: Dec 8th, 2018 23:32 Join Date: Jan 2018 Location: Sydney	Reviving the thread Has anyone sorted these codes? My 2014 xc90 DRawd just came up with them as well.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)