LHD- p1800 For Sale

[123GT-AMAZON]

would like to offer the chance to anyone before this goes into the workshop
( this car has been dry stored for the past 6 months in new workshop !! ) to be fully restored main reason is every space under cover is used storing 26 classic volvos and we need !!!!! some wiggle room to carry on working on them and some must go for this to happen so what ever sells first will give us the space required

this 1800 has a b20 engine fitted with overdrive it had spent most of its life in the states ( connecticuit) and was shipped over here, EVERYTHING is with car to complete it brightwork , trim clocks the lot anything thats not fitted like bumpers complete are in the boot to go with the car we have had a number of people intrested but first person to part with the cash will have a very !! solid project no panels needed what so ever - apart from in the rear floor pan and they also can be supplied with the car ( pressed floor pan type ) so everything is there to put this real nice example back on the road not much would it take to pass a m.o.t so could even drive it for a year or so before starting work on her

Call Tony on 01379 678227 or 07970944803

More Info will follow soon ..... like year and reg number with full spec

[skidje]

And how many GBP's are needed to make you part with this P1800?

[123GT-AMAZON]

Originally Posted by skidje

And how many GBP's are needed to make you part with this P1800?

£4,500 o.v.n.o is the asking price ( very little is needed and it will pass a M.O.T which is maybe on the cards then re advertsie ) before we do a nut and bolt restro on her but then the price naturally will jump up we need some space so what ever sells first will give us that also we have other vechicles for sale somethings has to go

[123GT-AMAZON]

also something me and my dad was wondering what the maker of the alloy wheels was ?? so if anyone looking can answer that would be real nice they seem to suit the car nice very little marks or info is stamped on the wheels just a small symbol behind each one of the vents in wheel

[123GT-AMAZON]

ok this is a 1967 P1800 S - COMPLETE & IS A RUNNER

F-reg fitted with the B20 engine very smooth runner and good starter

also fitted is the Overdrive all works very well and dad had just told me the floor pans will go with the car included in price ( cost him £ 120 per floor pan x2 and plus v.a.t so thats included )

and the boot Full of spares which goes with car grills , grill surround , bumpers front and back lots lots more

so snap up a very good solid project while its on offer !!

[222s]

Originally Posted by 1800necwinner

also something me and my dad was wondering what the maker of the alloy wheels was ?? so if anyone looking can answer that would be real nice they seem to suit the car nice very little marks or info is stamped on the wheels just a small symbol behind each one of the vents in wheel

I'm pretty sure that they are GKN Silverstone F.T.Ds, but the only info on them that I've seen* (attached) lists the largest diameter as 14" - are yours 14" or 15"? In the pics, they look more like the latter. I'd be interested to know the size & offset, as I haven't seen a set of these on a Volvo before.

*A friend recently sold a set of smaller diameter ones in 4x108mm pcd.

[123GT-AMAZON]

Originally Posted by 222s

I'm pretty sure that they are GKN Silverstone F.T.Ds, but the only info on them that I've seen* (attached) lists the largest diameter as 14" - are yours 14" or 15"? In the pics, they look more like the latter. I'd be interested to know the size & offset, as I haven't seen a set of these on a Volvo before.

*A friend recently sold a set of smaller diameter ones in 4x108mm pcd.

i was shocked to see they are a 14" yet they fill the wheel arch just right and dont look small they dont half look like a 15"

i was comparing them to a vintage set of torq thrust alloy wheels on 14" i have here you can never tell till they have been fitted to the car i quess

most annoying thing is we only have two of those alloy wheels so we have put the original wheels as was fitted by volvo back on car and have the alloy wheels put to one side to find another two making a set up

[222s]

Originally Posted by 1800necwinner

i was shocked to see they are a 14" yet they fill the wheel arch just right and dont look small they dont half look like a 15"

Must be the different arch shape on the 1800 - 14"s always look too small on an Amazon.

[123GT-AMAZON]

here is a link to the car where it is listed atm to help promote the sale

http://www.ebay.co.uk/itm/1968-VOLVO...item2ec558049f

[123GT-AMAZON]

This Car is Now SOLD