Front Wing replacement

Maccmike · Dec 8th, 2019, 13:52

I have just replaced my front wing on 05 S60 so thought Id share a quick how to.
Remove;
Bumper corner trim and bolt.
Under the bonnet grille clips - push the centre in.
Wheel arch front screw and clip.
Pull corner of bumper out and remove 2 torx and 3 bolts.
Drill out the rivets in the wheel arch liner.
Pull back on front sill to remove bolt.
Pull rear arch liner forward to access inside bolt slightly above indicator lamp.
Open door to access bolt above door hinge.
Remove rubber trim at corner of windscreen to access bolt.
Remove the 3 8mms on wing top and hey presto.

oragex · Dec 9th, 2019, 20:44

Not to hijack the thread but here's some visuals. I wonder how did the plastic trim at the bottom of the door came out ? There is one bolt behind it (I was thinking about drilling a hole into this plastic and covering it with some tape when finished) https://www.youtube.com/watch?v=gaJFnRGVFA0

Maccmike · Dec 9th, 2019, 22:11

You can get to the bolt from behind the arch liner - just.

Dec 8th, 2019, 13:52	#1
Maccmike Member Last Online: Feb 8th, 2021 20:37 Join Date: Nov 2019 Location: S60 2.0T	Front Wing replacement I have just replaced my front wing on 05 S60 so thought Id share a quick how to. Remove; Bumper corner trim and bolt. Under the bonnet grille clips - push the centre in. Wheel arch front screw and clip. Pull corner of bumper out and remove 2 torx and 3 bolts. Drill out the rivets in the wheel arch liner. Pull back on front sill to remove bolt. Pull rear arch liner forward to access inside bolt slightly above indicator lamp. Open door to access bolt above door hinge. Remove rubber trim at corner of windscreen to access bolt. Remove the 3 8mms on wing top and hey presto.

Dec 9th, 2019, 20:44	#2
oragex Premier Member Last Online: Jul 26th, 2021 21:24 Join Date: Jun 2013 Location: Coldnada	Not to hijack the thread but here's some visuals. I wonder how did the plastic trim at the bottom of the door came out ? There is one bolt behind it (I was thinking about drilling a hole into this plastic and covering it with some tape when finished) https://www.youtube.com/watch?v=gaJFnRGVFA0 __________________ Several Volvo Repair Videos https://www.youtube.com/playlist?lis...ECTts0FSVSOT_c

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Dec 9th, 2019, 22:11	#3
Maccmike Member Last Online: Feb 8th, 2021 20:37 Join Date: Nov 2019 Location: S60 2.0T	You can get to the bolt from behind the arch liner - just.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)