|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
Boot Lid Open Message / Boot won't openViews : 4147 Replies : 4Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Mar 22nd, 2015, 20:32 | #1 |
New Member
Last Online: Dec 31st, 2020 13:34
Join Date: Mar 2015
Location: Dublin
|
Boot Lid Open Message / Boot won't open
Hi All,
I have a Volvo S40 2007. About two weeks ago, I noticed all the following things happened at the same time: (1) Boot lid open message on dashboard (when boot closed) (2) Lights in the boot are very dim and are on even when the boot is closed (3) The boot usually doesn't open when I press the boot release catch but does occasionally. (4) Number plate lights are very dim but get much brighter when I press the boot release catch. I've seen the posts about broken wires in the wiring loom and have tested the length of this - bending it etc - to see if it fixes the problem - but it doesn't seem to. Any idea what it is? Is it still likely to be the wiring loom? Regards, Mark |
Mar 22nd, 2015, 20:45 | #2 |
Member
Last Online: May 13th, 2021 07:54
Join Date: Jan 2012
Location: Cumbernauld
|
It's not a big job to check to loom,mine broke in the flex between boot lid and body.No way to check without seeing the wires themselves.
|
Mar 23rd, 2015, 10:08 | #3 |
Member
Last Online: Dec 2nd, 2021 16:51
Join Date: May 2013
Location: Matlock
|
Symptoms suggest wiring loom.
Easy to fix (if you can get the boot open). If not loom then look at micro switch and associated bracket (reg plate lights etc) as that often goes. Again easy to fix and cheep (around £14 from dealer). If you find you cannot get the boot open undo the boot handle - there's a couple of torx screws near the reg lights iirc - and make contact between the two wires feeding the microswitch. If it opens you will then know its the microswitch....
__________________
2004 V50 T5 SE 6 Speed Manual The Death Star... 2009 S40 2.0i R-Design 5 Speed Manual The Flash Car... |
Mar 23rd, 2015, 16:15 | #4 |
Member
Last Online: Jul 20th, 2021 08:47
Join Date: Nov 2013
Location: Gothenburg
|
99% chance it's the wiring loom. I wrote a replacement guide with pictures here: Replacement Guide
|
Mar 23rd, 2015, 22:45 | #5 |
New Member
Last Online: Dec 31st, 2020 13:34
Join Date: Mar 2015
Location: Dublin
|
Thanks everyone for the advice, yes it turned out to be the wiring loom.
I purchased a new wiring loom and thanks to the guide from Snoodini, it turned out to be very easy to replace. Saved a more than a few euros by doing it myself. I just opened up the old one - a completely severed cable inside the the rubber tube at the point where it enters into the boot lid. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|