|
S60 & V60 '11-'18 / XC60 '09-'17 General Forum for the P3-platform 60-series models |
Information |
|
Parking brake module failureViews : 1767 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jun 23rd, 2019, 18:06 | #1 |
Master Member
Last Online: Dec 29th, 2023 17:48
Join Date: Sep 2011
Location: Thurrock
|
Parking brake module failure
Hi all,
Looks like I've had the parking brake module fail on my MY12 V60 d5. Essentially the left motor is no longer operating. I know it's not the wiring or motor as I've hooked a battery to the PBM wiring pins and it has operated the left motor, so it must be the PBM itself. Can I just swap out the PBM? Or does this need coding? Thanks!
__________________
V60 D5 215 (pre-facelift) Ex-S40 Sport 2.0d with 180bhp & 300lbft |
Nov 8th, 2019, 22:28 | #2 |
New Member
Last Online: Nov 9th, 2019 18:23
Join Date: Nov 2019
Location: Norwich
|
Hi,
Snap, I have exactly the same problem. No voltage at the plug so looking into the EPB module. Regards KCB |
Nov 9th, 2019, 11:43 | #3 |
Master Member
Last Online: Dec 29th, 2023 17:48
Join Date: Sep 2011
Location: Thurrock
|
After a lot of diagnosis that pointed to the module, mine turned out to just be the motors. Got new motors next day from PFS parts.
If it is the module itself then it needs coding and is around a £350-400 job, excluding motors. I spoke to some garages and they think the motors get water in and short the module (normally nearside), so it's better to replace both motors and the module.
__________________
V60 D5 215 (pre-facelift) Ex-S40 Sport 2.0d with 180bhp & 300lbft |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|