Fuel tank thread size

red122 · Jul 31st, 2022, 20:12

I would like to fit a barb type connector into my amazon tank . Can anyone tell me the fitment or thread size of the hole in the tank please ? I think it may be 3/8 BSP ?

c1800 · Aug 1st, 2022, 17:25

Hi, you might get an answer here, however this area is if you want to buy parts , if you want technical information or how to’s best post in the General section.
Good luck.

omc 47 · Aug 1st, 2022, 21:50

Quote:

Originally Posted by c1800

Hi, you might get an answer here, however this area is if you want to buy parts , if you want technical information or how to’s best post in the General section.
Good luck.

No..............this is the wants section and Red wants to know the thread size in an Amazon fuel tank.
3/8 BSP sounds right but l never noted mine when l had my tank out sorry Alan.

amazon69 · Aug 3rd, 2022, 12:56

Do you mean the size of the drain plug thread or the fuel outlet (assuming they are different)?

red122 · Aug 6th, 2022, 07:44

I have found a supplier on ebay .its a 1/8 bsp brass threaded barb with an 8mm diameter barb for a small length of flexible rubber fuel pipe to attach onto before going to a new fuel line .works very well

Jul 31st, 2022, 20:12	#1
red122 Master Member Last Online: Aug 6th, 2022 07:44 Join Date: Jun 2007 Location: tunbridge wells	Fuel tank thread size I would like to fit a barb type connector into my amazon tank . Can anyone tell me the fitment or thread size of the hole in the tank please ? I think it may be 3/8 BSP ? Last edited by red122; Jul 31st, 2022 at 20:17.

Aug 3rd, 2022, 12:56	#4
amazon69 Premier Member Last Online: Aug 4th, 2022 21:46 Join Date: Jan 2006 Location: Falmouth	Do you mean the size of the drain plug thread or the fuel outlet (assuming they are different)? __________________ Falmouth, Cornwall. 1970 California white 131.

Aug 6th, 2022, 07:44	#5
red122 Master Member Last Online: Aug 6th, 2022 07:44 Join Date: Jun 2007 Location: tunbridge wells	barb I have found a supplier on ebay .its a 1/8 bsp brass threaded barb with an 8mm diameter barb for a small length of flexible rubber fuel pipe to attach onto before going to a new fuel line .works very well

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Aug 1st, 2022, 17:25	#2
c1800 Master Member Last Online: Today 05:46 Join Date: Oct 2013 Location: Alberta	Hi, you might get an answer here, however this area is if you want to buy parts , if you want technical information or how to’s best post in the General section. Good luck.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)