|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
S40 (new) Rear Brake Pads ReplacementViews : 3391 Replies : 10Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Apr 16th, 2019, 12:50 | #11 |
New Member
Last Online: Apr 24th, 2019 09:13
Join Date: Apr 2012
Location: Glasgow
|
C30
I replaced my rear pads on C30 at weekend. Not that I needed to but there was a rattle and after two visits to a mechanic, two sets of pads, loads of grease couldn't sort so decided to have a go myself.
Fitted Brembo pads, hoped these would make a difference. The wind back tool I purchased did not fit the slots in the C30's piston so used pliers to wind back instead, bit of an effort but worked out ok. I found a couple of turns anti-clockwise to loosen then turning clockwise to wind in made it easier. As mentioned before, remove the brake fluid cap and once pads fitted pump the brake a couple of times until firm again. The clips are a bit fiddly to replace once completed but a gentle nudge with a rubber mallet helped. ..... No more rattle Last edited by scout70; Apr 16th, 2019 at 12:58. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|