fault code p2008

jeffmasson · Apr 10th, 2013, 07:38

Hi

Have got a emissions light showing on my 2005 v50 1.8 petrol. I had the codes read by a friend the code is p2008 I checked on the web bit can't find out what it might be any one got any ideas?

Thanks

jeffmasson · Apr 10th, 2013, 18:29

I finally found out what this fault code is for.

Intake Manifold Runner Control Circuit/Open

Anyone replaced one? Can't seem to find any pictures or prices online.

rmdavy · Jan 17th, 2014, 21:11

Hi there i've got an s40 2005 1.8petrol same issue same error code just happened today. Have you managed to get yours resolved?

Any information would be appreciated.

Cheers, Rich.

jeffmasson · Jan 17th, 2014, 21:22

Yes it was the swirl control solenoids. Was done by the gar I got the car from under warranty so don't know the cost sorry

rmdavy · Jan 17th, 2014, 21:37

Hi thanks for coming back to me so quickly it's much appreciated - i'd found reference to that but mainly for diesel - good to know it solves it for petrol too. Thanks again.

rmdavy · Jan 18th, 2014, 16:50

Managed to fix this with a bit of carb cleaner £6 halfords and torque on Android to reset the code.

Basically remove the large pipe that goes between the air filter and the inlet manifold, once it's removed clean the inside of the inlet with carb cleaner mine wasn't too bad so I didn't remove the whole assembly. Reset the code and for me at least that solved it. Fingers crossed!!

Hope this helps someone.

noney82 · Jan 18th, 2014, 18:14

Quote:

Originally Posted by rmdavy

Managed to fix this with a bit of carb cleaner £6 halfords and torque on Android to reset the code.

Basically remove the large pipe that goes between the air filter and the inlet manifold, once it's removed clean the inside of the inlet with carb cleaner mine wasn't too bad so I didn't remove the whole assembly. Reset the code and for me at least that solved it. Fingers crossed!!

Hope this helps someone.

Don't suppose you have a link to the bluetooth adapter you got for torque please

Unreal master tech · Jan 18th, 2014, 20:21

Hi mate the code is for the two solenoid valves (they come together ) that sit behind the hose you have removed the open the intake flaps that are internal within the intake manifold the valves have four vacuum hoses going to them the replacement parts are £55 so a cheap fix in my book?!

rmdavy · Jan 18th, 2014, 22:59

Here's the Bluetooth Adapter I purchased from Ebay that I used with Torque on Android to reset the code.

http://www.ebay.co.uk/itm/Google-And.../190869316819?

rmdavy · Jan 18th, 2014, 23:03

Quote:

Originally Posted by Unreal master tech

Hi mate the code is for the two solenoid valves (they come together ) that sit behind the hose you have removed the open the intake flaps that are internal within the intake manifold the valves have four vacuum hoses going to them the replacement parts are £55 so a cheap fix in my book?!

Good times then! Let's hope it lasts... Just in case it doesn't do you have the Part Numbers for the two solenoids?

Apr 10th, 2013, 07:38	#1
jeffmasson Senior Member Last Online: Jan 2nd, 2024 18:23 Join Date: Apr 2013 Location: worthing	fault code p2008 Hi Have got a emissions light showing on my 2005 v50 1.8 petrol. I had the codes read by a friend the code is p2008 I checked on the web bit can't find out what it might be any one got any ideas? Thanks

Jan 17th, 2014, 21:11	#3
rmdavy New Member Last Online: Mar 29th, 2024 17:19 Join Date: Jan 2014 Location: N/A	S40 2005 1.8 Petrol Hi there i've got an s40 2005 1.8petrol same issue same error code just happened today. Have you managed to get yours resolved? Any information would be appreciated. Cheers, Rich.

Jan 18th, 2014, 16:50	#6
rmdavy New Member Last Online: Mar 29th, 2024 17:19 Join Date: Jan 2014 Location: N/A	Fix Code P2008 Managed to fix this with a bit of carb cleaner £6 halfords and torque on Android to reset the code. Basically remove the large pipe that goes between the air filter and the inlet manifold, once it's removed clean the inside of the inlet with carb cleaner mine wasn't too bad so I didn't remove the whole assembly. Reset the code and for me at least that solved it. Fingers crossed!! Hope this helps someone.

Apr 10th, 2013, 18:29	#2
jeffmasson Senior Member Last Online: Jan 2nd, 2024 18:23 Join Date: Apr 2013 Location: worthing	I finally found out what this fault code is for. Intake Manifold Runner Control Circuit/Open Anyone replaced one? Can't seem to find any pictures or prices online.

Jan 17th, 2014, 21:22	#4
jeffmasson Senior Member Last Online: Jan 2nd, 2024 18:23 Join Date: Apr 2013 Location: worthing	Yes it was the swirl control solenoids. Was done by the gar I got the car from under warranty so don't know the cost sorry

Jan 17th, 2014, 21:37	#5
rmdavy New Member Last Online: Mar 29th, 2024 17:19 Join Date: Jan 2014 Location: N/A	Hi thanks for coming back to me so quickly it's much appreciated - i'd found reference to that but mainly for diesel - good to know it solves it for petrol too. Thanks again.

Jan 18th, 2014, 20:21	#8
Unreal master tech Senior Member Last Online: Jun 26th, 2016 19:23 Join Date: Jan 2012 Location: Livingston	Hi mate the code is for the two solenoid valves (they come together ) that sit behind the hose you have removed the open the intake flaps that are internal within the intake manifold the valves have four vacuum hoses going to them the replacement parts are £55 so a cheap fix in my book?!

Jan 18th, 2014, 22:59	#9
rmdavy New Member Last Online: Mar 29th, 2024 17:19 Join Date: Jan 2014 Location: N/A	Here's the Bluetooth Adapter I purchased from Ebay that I used with Torque on Android to reset the code. http://www.ebay.co.uk/itm/Google-And.../190869316819?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)