S80: General - 2.4d 163 remap / D5 Dual Exhaust

Josh Wyatt · Mar 8th, 2016, 00:06

Hello all!

I've just joined your forum, I've enjoyed reading through so far.

A few questions if I may...I have already searched!

I have just acquired a 2007 P3 S80 2.4d manual. As standard it comes with 163bhp, I understand it's essentially a detuned D5...does this make it possible to remap to 205bhp as with the later S80's?

Rear exhaust / Bumper
It requires a new rear bumper and exhaust back box. I have been given a rear bumper and dual exit exhaust (tail pipe either side) from a 2014 S80 D5...has anyone fitted the dual system to one originally a single exit? Naturally I'll need exhaust hangers, but were there any changes that mean it may not fit? I don't have the new exhaust here yet, or I'd just try fitting it!

MarkStevens82 · Mar 8th, 2016, 14:17

hi josh. i have a v70 175 and im thinking of increasing the power. i posted a thread last week on here about the polestar software update. i know its more expensive then you usual remap but its worth a look as its probably a lot more safer for the engine. have a look for it and go on the polestar websitewww.polestar.com

Josh Wyatt · Mar 8th, 2016, 19:31

Thanks Mark, I'll go down the polestar route! I'd be happier knowing, they know exactly what they're doing!

Does anyone know about the exhaust difference, if any?

Thanks!

Rooster · Mar 8th, 2016, 19:43

Exhaust should be a straight fit, old one off new one on,

You will have to cut exhaust where it goes over rear axle and sleeve it

Mar 8th, 2016, 00:06	#1
Josh Wyatt New Member Last Online: Apr 18th, 2024 22:53 Join Date: Mar 2016 Location: Oxford	2.4d 163 remap / D5 Dual Exhaust Hello all! I've just joined your forum, I've enjoyed reading through so far. A few questions if I may...I have already searched! I have just acquired a 2007 P3 S80 2.4d manual. As standard it comes with 163bhp, I understand it's essentially a detuned D5...does this make it possible to remap to 205bhp as with the later S80's? Rear exhaust / Bumper It requires a new rear bumper and exhaust back box. I have been given a rear bumper and dual exit exhaust (tail pipe either side) from a 2014 S80 D5...has anyone fitted the dual system to one originally a single exit? Naturally I'll need exhaust hangers, but were there any changes that mean it may not fit? I don't have the new exhaust here yet, or I'd just try fitting it!

Mar 8th, 2016, 14:17	#2
MarkStevens82 New Member Last Online: Oct 8th, 2016 21:09 Join Date: Sep 2015 Location: Crosby / liverpool	remap hi josh. i have a v70 175 and im thinking of increasing the power. i posted a thread last week on here about the polestar software update. i know its more expensive then you usual remap but its worth a look as its probably a lot more safer for the engine. have a look for it and go on the polestar websitewww.polestar.com

Mar 8th, 2016, 19:43	#4
Rooster Speed freak Last Online: Apr 3rd, 2020 22:04 Join Date: Nov 2003 Location: Yorkshire	Exhaust should be a straight fit, old one off new one on, You will have to cut exhaust where it goes over rear axle and sleeve it __________________ 04 XC90 D5 --- Big bus 00 pug 306HDi --- Run about 88 pug 309GTi --- Project track car 07 CB600 Hornet --- 2 wheel fun

Mar 8th, 2016, 19:31	#3
Josh Wyatt New Member Last Online: Apr 18th, 2024 22:53 Join Date: Mar 2016 Location: Oxford	Thanks Mark, I'll go down the polestar route! I'd be happier knowing, they know exactly what they're doing! Does anyone know about the exhaust difference, if any? Thanks!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)