|
700/900 Series General Forum for the Volvo 740, 760, 780, 940, 960 & S/V90 cars |
Information |
|
Volvo 940 drive shaft can it only fit one wayViews : 253 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Sep 28th, 2023, 20:18 | #1 |
Junior Member
Last Online: Apr 24th, 2024 22:01
Join Date: Sep 2017
Location: London
|
Volvo 940 drive shaft can it only fit one way
Volvo 940 drive shaft can the centre splines only fit one way?I marked my one when fitting centre bearing but the mark came off now I have a vibration
|
Sep 28th, 2023, 22:17 | #2 |
Trader Volvo in my veins
Last Online: Apr 26th, 2024 23:53
Join Date: Dec 2004
Location: Anglesey
|
The propshaft can only fit one way (no drive shafts on a 940) but you can force it the wrong position so if it just slid together then it will be right. You can always check to see the UJ's are in phase.
Also make sure all the bolts are in the same way as before. If there were shims packing the support up make sure they were all fitted. Tired engine/gearbox mounts can also cause issues. The 7/900 series support design does often give vibration issues |
Sep 28th, 2023, 22:38 | #3 |
Junior Member
Last Online: Apr 24th, 2024 22:01
Join Date: Sep 2017
Location: London
|
What way should it be phased
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|