Window seal needed for my 145

[Caspar]

Is there anybody who can help me find window seals for the windows in the back of the 145.

My 145 has dual windows at each side and the one at the end can be opened.
the windows are like in the picture below



The seals of all four windows are worn out and hard to find.


Regards
Caspar Remmers

[john h]

Mmm, that might be difficult. The opening rear side window on the 145 was replaced quite early in the production run by the single peice window.

Are you looking for new, or would good used seals be OK?

John

[mo5]

try www.skandix.de or www.scandcar.nl . they might do them? nice car, same as mine except for the split rear windows..

[Caspar]

Originally Posted by john h

Mmm, that might be difficult. The opening rear side window on the 145 was replaced quite early in the production run by the single peice window.

Are you looking for new, or would good used seals be OK?

John

Hi John,

Im aiming for used seals because it is almost impossible to get a new set

Can you help me out?

[Caspar]

Originally Posted by mo5

try www.skandix.de or www.scandcar.nl . they might do them? nice car, same as mine except for the split rear windows..

Hi Mo

I already tried scandcar but they are out of these seals
The German site I never tried, I'll check it out

Caspar

[classicswede]

I very much doubt you will get good second hand seals for one of these. I have the same problem to resolve.

For The fixed window I'm going to have to cut down the seal from a later full size window. For the opening window I will have to use some std profile seals from
here http://www.woolies-trim.co.uk/c-14-rubber.aspx

or one of teh other suppliuers

[Caspar]

Thanks classic wede,

I didn't know there were such broad variaty ofrubber profiles for sale, I alway thaught it was like the realy standard ones
Thanks for your reply

Caspar