General ECU Tune and Vault code

[Gotcha]

I had my DPF removed on a D3 5pot, about 3 years ago, due to it going bad.
So software DPF removal was done, and with that I had a tune done, as per my own specs. Did not want to go over the max nm allowed for the gearbox.

Now my question is, seeing that when a tune is done you get the errors:
CEM-U030100 - Software incompatinility with ECM/PCM
ECM-U032700 - Software incompatibility with vehicle security control module.

Will these fault codes influence the tune? As they do go from yellow warning to red in vida.

[sickzoid]

I get the same message on my tune. Pretty sure it's normal as the engine is operating out of normal mapping.

Originally Posted by Gotcha

I had my DPF removed on a D3 5pot, about 3 years ago, due to it going bad.
So software DPF removal was done, and with that I had a tune done, as per my own specs. Did not want to go over the max nm allowed for the gearbox.

Now my question is, seeing that when a tune is done you get the errors:
CEM-U030100 - Software incompatinility with ECM/PCM
ECM-U032700 - Software incompatibility with vehicle security control module.

Will these fault codes influence the tune? As they do go from yellow warning to red in vida.

[Gotcha]

Awsome, was just wondering if maybe the ecu will pull back performance due to this code.