Sat Nav/Phone: MY2008 Parrot MKi9100 install guide

[Ron_XC90]

Originally Posted by tav20k

is it just me or have the images disappeared from the first page of this thread?

All I can see is thumbnail icon (not clickable).

I'm hoping this images will help figure out ISO harness behind radio to fit one of these:

Hi tav20k, apologies had some issues with my website hoster recently and didn't realise these photos were stored there. Anyway I put them back now, hope they are of help to you...

[edwards798]

Thank you. This will help very much as can now see which one needs to be replaced.

[JimnyBobbins]

Originally Posted by Ron_XC90

Below a guide on how I installed a Parrot MKi9100 bluetooth/Ipod unit to a MY2008 (connected to AUX input).


For the switched (ignition) 12V supply and Ground I used the wiring from the 12v accessory socket

I am trying to install my girlfriends parrot kit to her my2004 xc90 and I was wondering where a 90 degree power looking plug was. Now I know! It's behind the cigarette socket! This is the only source of finding out I have found all evening. The parrot and the ISO instructions I think are nigh on useless.

It looks tome like the power to the amp under the drivers seat has a power going to it so I was expecting an ignition suplly power to power up the parrot kit but it seems no.

I read all these reviews of it taking about 45minutes to install. Hmm yeah ok! I have been at it (including web searching) for 4 hours now! Lets hope I finish it tomorrow!

[Ron_XC90]

If you want a switched power supply near the amplifier under the driver seat, the wires for the 12v socket in the armrest run through the gearbox tunnel and can easily be picked up...

[JimnyBobbins]

Originally Posted by Ron_XC90

If you want a switched power supply near the amplifier under the driver seat, the wires for the 12v socket in the armrest run through the gearbox tunnel and can easily be picked up...

Ah cunning info. It might come to that if getting at the ciggy socket doesnt work!