|
General Volvo and Motoring Discussions This forum is for messages of a general nature about Volvos that are not covered by other forums and other motoring related matters of interest. Users will need to register to post/reply. |
Information |
|
Estate load cover identification please?Views : 532 Replies : 7Users Viewing This Thread : |
|
Thread Tools | Display Modes |
May 9th, 2019, 12:08 | #1 |
Master Member
Last Online: Yesterday 19:02
Join Date: May 2016
Location: Cheshire
|
Estate load cover identification please?
Hi All,
I forgot I had this in the garage and found it when looking for an 850 part for another member a few weeks ago. I'm sure I bought it from a chap who had a 240 estate years ago, but I'm not sure now if it's actually from a 700 or 900 series car? I've owned a V40, V70 and 850 but not got around to anything this fits as yet so ought to find out and see if anyone needs it Any ideas, see pics below? Dimensions of the canvas part are approx. 1465mm wide by 1180mm depth. The metal roller part is approx. 1515mm measured to the plastic end fixings but is spring loaded so would compress a little to fit. Generally good condition but I don't have any other fixings with it. Any idea of value would be good too as someone is bound to be missing one and can make use of it? Thanks Stu
__________________
2017 V60 CC D4 AWD Polestar |
May 11th, 2019, 18:13 | #2 |
Premier Member
Last Online: Feb 11th, 2023 20:32
Join Date: May 2010
Location: Blyth, Northumberland
|
Possibly 700/900 series.
The one I have fitted in my 940 is approx. 480mms wide and 1110mms long when fully extended. The roller mechanism is 505mms end to end excluding the rectangular locating lugs.
|
The Following User Says Thank You to Ian21401 For This Useful Post: |
May 13th, 2019, 13:52 | #3 |
Premier Member
Last Online: Feb 11th, 2023 20:32
Join Date: May 2010
Location: Blyth, Northumberland
|
Correction. Silly me.
Width should be 1480mms, roller tube 1505mms. long. Knew something was not right with those previous measurements.
|
The Following User Says Thank You to Ian21401 For This Useful Post: |
May 15th, 2019, 01:02 | #4 |
Junior Member
Last Online: Apr 23rd, 2024 14:53
Join Date: Apr 2019
Location: Sandbach
|
This looks very much like the one fited to my 940 Estate - I'll get the tape measure on it!
If it is the one, it would have come originally a couple of brackets in which to fit the plastic end fixings and two hooks on which to secure the eyes on the end of the roll. It was an "optional extra" when new. |
The Following User Says Thank You to MWCheshire For This Useful Post: |
May 19th, 2019, 18:37 | #6 |
Master Member
Last Online: Yesterday 19:02
Join Date: May 2016
Location: Cheshire
|
Hi all, thanks for the replies, I hadn't had chance to get on here to reply for a while but it looks like it's from a 940 estate then. Thanks for the measurement check and info, Ian
MW - if you could check yours with a tape measure that would be great too and I'll re-measure this one, sounds very close to Ian's measurements though so likely a 940.
__________________
2017 V60 CC D4 AWD Polestar |
May 19th, 2019, 18:37 | #7 |
Master Member
Last Online: Yesterday 19:02
Join Date: May 2016
Location: Cheshire
|
Hi Andrew - happy to give you first dibs but I'd have to check if any courier would take it due to length and what postage would cost assuming you aren't local to collect in person?
__________________
2017 V60 CC D4 AWD Polestar |
Sep 8th, 2019, 13:04 | #8 |
Master Member
Last Online: Yesterday 19:02
Join Date: May 2016
Location: Cheshire
|
Hi All,
Just bumping this thread as I tripped over this in the garage yesterday I'll stick an advert in the 900 series section 'for sale' bit, if anyone needs one? Cheers Stu
__________________
2017 V60 CC D4 AWD Polestar |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|