wanted 340/260 rear hub

ledge · Nov 30th, 2010, 13:54

wanted 340 or 360 both rear hubs thanks paul

classicswede · Dec 5th, 2010, 22:42

I have a complete rear axle available.

TonyS9 · Dec 6th, 2010, 00:21

Depends what parts you are actually looking for, There are complexities with removing the brake back plate, requiring new bearings. If you keep the brake back plate you need the full brake parts list which is different for 340s and 360s.

If it is just the bearings that are the problem these can be replaced, although there are several different constructions, and 2 different hub sizes to fit different sized axle holes. See this thread for more information;

http://www.volvo300mania.com/forum-u...&hilit=bearing

I have an empty hub, just the aluminium part, no bearings or any other parts in it. 360 83 on approx. Its easy to fit the bearing and I also have some circlips spare, but you need to read the above thread for reassembly details particularly for reinserting the shaft.

Nov 30th, 2010, 13:54	#1
ledge New Member Last Online: May 1st, 2016 10:26 Join Date: Nov 2010 Location: wilmslow	wanted 340/260 rear hub wanted 340 or 360 both rear hubs thanks paul Last edited by ledge; Nov 30th, 2010 at 14:04.

Dec 5th, 2010, 22:42	#2
classicswede Trader Volvo in my veins Last Online: Today 11:43 Join Date: Dec 2004 Location: Anglesey	I have a complete rear axle available. __________________ http://www.classicswede.org www.classicswede.co.uk

Dec 6th, 2010, 00:21	#3
TonyS9 Premier Member Last Online: Apr 9th, 2024 21:44 Join Date: Jul 2009 Location: Holywood	Depends what parts you are actually looking for, There are complexities with removing the brake back plate, requiring new bearings. If you keep the brake back plate you need the full brake parts list which is different for 340s and 360s. If it is just the bearings that are the problem these can be replaced, although there are several different constructions, and 2 different hub sizes to fit different sized axle holes. See this thread for more information; http://www.volvo300mania.com/forum-u...&hilit=bearing I have an empty hub, just the aluminium part, no bearings or any other parts in it. 360 83 on approx. Its easy to fit the bearing and I also have some circlips spare, but you need to read the above thread for reassembly details particularly for reinserting the shaft. Last edited by TonyS9; Dec 6th, 2010 at 00:31.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)