|
S80 '06-'16 / V70 & XC70 '07-'16 General Forum for the P3-platform S80 and 70-series models |
Information |
|
What is the "ECC"?Views : 2838 Replies : 30Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Dec 14th, 2018, 23:39 | #21 |
Senior Member
Last Online: Mar 15th, 2021 22:31
Join Date: Jun 2017
Location: Nuneaton
|
That is a good point actually as most will ask if the car has the factory alarm fitted etc.
__________________
S80 P3 SE LUX D5 Auto |
Dec 14th, 2018, 23:43 | #22 |
Member
|
|
Dec 15th, 2018, 09:28 | #23 |
Experienced Member
Last Online: Today 14:07
Join Date: Jun 2007
Location: L/H side
|
Indeed , and at least you will know if someone has broken a window outside , No one else takes any notice of sirens but you will . The siren will need a software from the dealer ..
__________________
My comments are only based on my opinions and vast experience . |
Dec 15th, 2018, 10:45 | #24 |
Senior Member
Last Online: Mar 15th, 2021 22:31
Join Date: Jun 2017
Location: Nuneaton
|
Siren is plug and play, no software should be needed.
Changed mine for a new one with no problems.
__________________
S80 P3 SE LUX D5 Auto Last edited by Waynedance; Dec 15th, 2018 at 10:50. |
Dec 15th, 2018, 19:38 | #25 |
Member
|
I don't think my model/year has any software requirements in that respect, thank god. I was able to remove the siren without any complaint from the main brain.
|
Jun 23rd, 2023, 08:46 | #26 | |
New Member
Last Online: Feb 20th, 2024 22:15
Join Date: Jun 2023
Location: Hardelot
|
Quote:
I'm very new to this forum and thanks to all for your posts, so much information ! I have the same trouble with fuse 26 blowing immediately, I disconnected all ECC but it still does. The strange thing is that I had the siren disconnected a few years ago but the dealer told me this morning that it was only "software" disconnected. It seems to me that I should physically remove the siren, is it possible to do it by myself or do I have to go to a dealer ? My car is a XC70 from 2008 3.2 Thank you ! |
|
Jun 23rd, 2023, 12:54 | #27 |
Premier Member
|
|
Jun 28th, 2023, 22:33 | #28 |
New Member
Last Online: Feb 20th, 2024 22:15
Join Date: Jun 2023
Location: Hardelot
|
Good evening,
I tried to locate the siren module on my XC70 3.2 from 2008, but I couldn't ! I removed the Wheel Arch Liner on passenger and driver sides, but couldn't see any siren module. Could you help me find it ? Thank you ! |
Jun 29th, 2023, 11:49 | #29 |
Member
Last Online: Today 11:16
Join Date: Aug 2021
Location: Lancashire
|
It should be accessible by either removing the windscreen wiper cowl (requires a windscreen wiper arm puller tool) or on mine at least, you can access it by removing the battery box and it is just inside the bulkhead behind where the battery goes
|
The Following User Says Thank You to xavierx For This Useful Post: |
Feb 20th, 2024, 22:04 | #30 |
New Member
Last Online: Feb 20th, 2024 22:15
Join Date: Jun 2023
Location: Hardelot
|
Thank you so much to all for your help, I did physically remove the alarm siren on my XC70 3.2 2008 and then I could replace the fuse 26 without blowing it right away. Since 2 days I have my clim+radio+everything in the center console working again, so happy!
__________________
__________________ XC70 D5 2005 / XC70 3.2 2008 / C70 T5 2012 |
The Following User Says Thank You to Guigui62 For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|