|
S80 '06-'16 / V70 & XC70 '07-'16 General Forum for the P3-platform S80 and 70-series models |
Information |
|
Rear height sensors for ABL - which side?Views : 3922 Replies : 1Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Dec 14th, 2018, 12:27 | #1 |
VOC Member
Last Online: Feb 9th, 2024 15:31
Join Date: Dec 2011
Location: South Lakes
|
Rear height sensors for ABL - which side?
Hi all,
My 2012 XC70 SE LUX has started having problems with the self levelling on the headlamps, causing the occasional message on the dash and dropping the beams. VIDA gives code CEM-B104421 Rear Axle Sensor, General Signal Failures, Signal Too Low I believe it has a sensor on each side - but nowhere on VIDA does it specify which side this is - does anyone know? VIDA also mentions if this code comes with B104321 then it's likely to be a feed issue, as that number relates to the other sensor. But it still doesn't tell me which is which! Any help would be appreciated before I crawl under it! Thanks Stephen
__________________
2008 XC70 SE Lux D5 - 1966 Amazon - 1979 C202 Laplander Past: 1997 S70 TDi, 1997 C70 T5 GT, 2003 V70 Bi-Fuel, 2000 Ph2 V70 2.5D, 1997 V70R Auto FWD, 1998 V70R Manual AWD, 2004 XC90 D5 G/T, 2005 S60 D5 |
Dec 18th, 2018, 07:20 | #2 |
Premier Member
|
My car has one sensor on the front axle, one at the rear. Both are on the right side. You'll see the lever when you look behind the wheel.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|