|
200 Series General Forum for the Volvo 240 and 260 cars |
Information |
|
need helppp with my 78 245Views : 786 Replies : 5Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Feb 3rd, 2012, 06:25 | #1 |
New Member
Last Online: Oct 21st, 2012 06:10
Join Date: Jan 2012
Location: concord
|
need helppp with my 78 245
hello everyone,
I posted a topic previously and it was about my 78 volvo 245 idling rich and lopey idle well to give everyone a better idea I am posting a link to my video on youtube so you can hear exactly what the car sounds like..... in hopes maybe someone on here can tell me possible things that might or could cause this issue... thanks in advance everyone hope to get the car fixed so I can be driving her again lol. http://youtu.be/EY9qz1pRHxA |
Feb 3rd, 2012, 09:45 | #2 |
Senior Member
Last Online: Jun 20th, 2017 19:13
Join Date: Jan 2011
Location: Portsmouth
|
Sounds a bit like the small ends did when they went on my old Sunbeam Rapier. Hope not as that is a major strp down.
__________________
Previous Cars 1 x 1999 V70 2.0 10v 3 x 245 1 x 244 |
Feb 3rd, 2012, 13:18 | #3 |
New Member
Last Online: Oct 21st, 2012 06:10
Join Date: Jan 2012
Location: concord
|
jack spaniel what happened ? and what did you have to end up doing ?
|
Feb 3rd, 2012, 16:19 | #4 |
Senior Member
Last Online: Jun 20th, 2017 19:13
Join Date: Jan 2011
Location: Portsmouth
|
I went completely over the top and bought a short block, thus changing the main working parts of the engine. Reworked the cylinder head with new valve guides and valves and springs. All ran beautifully after that, but it should be noted that things were far less expensive way back then.
__________________
Previous Cars 1 x 1999 V70 2.0 10v 3 x 245 1 x 244 |
Feb 4th, 2012, 06:57 | #5 |
New Member
Last Online: Oct 21st, 2012 06:10
Join Date: Jan 2012
Location: concord
|
your right about that buddy..... I was thinking that the previous owner messed with the idle mixture screw cause since the injector o rings were leaking the messed with for a richer mixture and now i need to lean it out some or the WUR could be the issue here
|
Feb 5th, 2012, 12:44 | #6 |
Master Member
Last Online: Aug 9th, 2013 23:07
Join Date: Dec 2003
Location: hastings
|
To me it sounds like the exhaust is leaky. I had a bad exhaust manifold gasket, and that made the car run really rough. (although its hard to tell from a recording, that sound didn't sound as mechanical and 'ringy or thumpy' as I'd think an engine problem would)
Another thing, when I've had exhaust/manifold gasket issues, they tend to smooth out when the revs increase. When I had bad engine bearings, that made the engine vibrate more than at idle- it sent a 'shudder' through the car at certain RPM's. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|