Amazon Estate rear seat fittings

[Andyb73]

Hi, is there anyone out there with an Amazon estate that could post a picture of the rear seat back lower pivot points. I know on one side there is a bracket that a spring loaded pin goes into but I would like to see what is on the other side. All of these parts are missing on the car I have and all the drawings/catalogues I can find only show one side.

Thanks in advance

Andy...

[Nullifie]

Hi,
on both sides of the body the same steel part is fitted with 3 nuts each, see:
https://www.oudevolvo.nl/wp-content/...achterbank.jpg
The round hole in the middle of the steel part is for the pin / pivot point in the rear seat back (one side fix and other side spring loaded), the long hole aside in the steel part is for being able to press the spring loaded pin back (with a screwdriver or so) and release this pivot point of the rear seat back making it able to remove the rear seat back out of the car.
If complete this steel part is covered by a black plastic round cap.