|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
front Top Strut bearing MountViews : 846 Replies : 10Users Viewing This Thread : |
|
Thread Tools | Display Modes |
May 22nd, 2019, 23:37 | #1 |
Premier Member
Last Online: Mar 25th, 2024 23:28
Join Date: Aug 2013
Location: Emsworth,hants
|
front Top Strut bearing Mount
Hi has anyone had problems with cheap front Top Strut bearing Mounts
as the prices very a lot, Thanks Dave |
May 23rd, 2019, 00:51 | #2 |
Aka MadBabs
Last Online: Nov 11th, 2022 16:29
Join Date: Sep 2017
Location: London
|
Yes.
Lots of people I've seen here. Thus, as I'm about to have mine changed- I'll go for OEMS or look up current OEM supplier for volvo and get them directly, saving quite big cost of blue Volvo box they would cone in if I bought from dealer.
__________________
`03 V70 Mk2 Auto 2.4 B5244 NA, 170Bhp, 295K miles (Now parts donor) '05 XC70 MK2 Geartronic, 2.5 B5254T2, 210bhp, 129k miles |
May 23rd, 2019, 01:05 | #3 |
Premier Member
Last Online: Mar 25th, 2024 23:28
Join Date: Aug 2013
Location: Emsworth,hants
|
Hi Thanks I am just fitting koni front shocks, and testing the top bearing mounts I have found that the bearings do not run very smooth but when in use the steering was very good,
The rubber spring seats are still like new, Dave |
May 23rd, 2019, 01:14 | #4 |
Member
Last Online: Yesterday 09:11
Join Date: May 2013
Location: Transylvania
|
There is a video on youtube (made by oragex/Peppermint) about greasing the bearings...
__________________
V70 D5 2002 Manual 517.000 km (321.000 miles) |
The Following User Says Thank You to bkulcsar For This Useful Post: |
May 23rd, 2019, 01:16 | #5 |
Flaccid Member
Last Online: Mar 22nd, 2024 15:14
Join Date: Nov 2016
Location: Norwich
|
what's the test to know when these are shot?
__________________
2001 Volvo S60 T5 SE 2.3 Geartronic (Scrapped) 2007 Volvo S60 T5 SE 2.4 Geartronic (Sold) 2008 Volvo V70 D5 SE Sport Geartronic (Current) |
May 23rd, 2019, 01:24 | #6 | |
Premier Member
Last Online: Mar 25th, 2024 23:28
Join Date: Aug 2013
Location: Emsworth,hants
|
Quote:
Hi Barry , some have said there steering felt very notchy, mine feels fine but I have it all apart at the moment so I was just turning them with my fingers, Dave |
|
May 23rd, 2019, 13:27 | #7 |
Premier Member
Last Online: Today 02:07
Join Date: Feb 2009
Location: Hackensack
|
barrybritcher asked, "what's the test to know when these are shot?".
That question includes when they're near shot. Those damn bearing plates-automotive lazy susans-must be subject to variations in material quality like no other. There've been pictures of horridly rusty ones posted here. At 150K both of mine were new looking but for one thumb print of rust. The test would have to be rust in the raceways and on the ball bearings themselves. Inspection would be difficult as there's precious little room for spraying lube into them. A friend had a tenacious, clear viscous lube in a spray can. The spray can's straw worked well enough. Alas, that particular product is no longer around. So, if they (the bearing assemblies) look OK and roll well, you can lube 'em as best you can and reinstall. If they're rough running there's little to think about. If they're rolling OK and have rust on their plates, you gotta make your own mind up I suppose. They're not too dear. I'd see to the lubing of the balls and coat the entire thing with a hearty, outdoor worthy rust preventative. |
May 23rd, 2019, 22:06 | #8 |
Premier Member
Last Online: Jul 26th, 2021 22:24
Join Date: Jun 2013
Location: Coldnada
|
Just as above, the quality of this specific part is essential, when you think at the simple fact that these two bearings - at the left and right struts, carry no less than the whole front of the car weight - considering the car has a 60/40 weight distribution, that's about 800kg of load of these two, so 400kg load on one of them. As mentioned, cheap ones will cause hard to very hard and notchy steering and may not last much
As for testing them, it is a little tricky because turning them by hand may not mean much - we can't load them properly. When removing these, it is good to look up inside the tower area for any rust caused by the metal plate of the bearing in contact with the paint on the chassis. If you have the bearings in hand, indeed it's a good idea to pop the cover, clean and put some bearing grease inside https://www.youtube.com/watch?v=Pnoy6ixh2WA I've seen these rusted to the point of being almost impossible to turn by hand, but I believe that happens only in climates with harsh winters & salt (I'm in Canada). Upon purchasing a used Volvo, not impossible a previous owner to have replaced these with cheap components (or even with some cheap 'quick struts' assemblies). The good brands for the strut bearing are Ina, Lemforder, Boge. For the spring seat Sachs, Rein I haven't tested myself, but these parts look very similar in P1 and P2 volvo, so could them be exactly the same ? Asking because parts for P1 Volvo are being sold at much lower prices now, so that may be interesting. Here's an example https://www.fcpeuro.com/products/vol...untseatkit-oem
__________________
Several Volvo Repair Videos https://www.youtube.com/playlist?lis...ECTts0FSVSOT_c |
May 23rd, 2019, 22:33 | #9 |
Premier Member
Last Online: Mar 25th, 2024 23:28
Join Date: Aug 2013
Location: Emsworth,hants
|
Hi Thanks for the good info,
my bearings feel pitted, there is no sign of rust, I will try and clean and re pack the grease, the spring seats still look new, and I have had up rated springs for the last 3 years, when I fitted the springs 3 years ago all I changed was the springs, so I don't know how old the seats and bearing mounts are , I have had the car 6 years now, the car is a 2002, 84,000 miles, any ice cream |
May 24th, 2019, 00:40 | #10 |
Premier Member
Last Online: Jul 26th, 2021 22:24
Join Date: Jun 2013
Location: Coldnada
|
I don't think the genuine bearing plates are usually stamped, but worth looking for a brand (in case these were replaced in the past)
going simple with the ice cream now, vanilla + rum extract (in memory of the Malaga ice cream: vanilla, dry raisins, rum)
__________________
Several Volvo Repair Videos https://www.youtube.com/playlist?lis...ECTts0FSVSOT_c |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|