Body/Trim: - Isofix

br850 · May 12th, 2019, 18:46

I have an 04 S80 D5 and whilst the hanbook says the car has provision for Isofix child seat fittings I cannot see anything obvious behind the rear seats.
Do I need to get some kind of bracket and where does it fit?

Thanks

CaptainSlow337 · May 13th, 2019, 15:03

Yes, you can buy them for around £25 and they just bolt in. Takes seconds.

CaptainSlow337 · May 16th, 2019, 12:12

Turbodave is selling some too

Turbodave · May 16th, 2019, 12:34

Indeed, have two original Volvo brackets plus the nuts / bolts here. As has been said, simple job. 5mins per side and a 15mm and 17mm socket / spanners and that's it. Lift the rear sear base, place the bracket on the car body lined up with the pre-existing holes (passenger side uses the existing seat belt anchor bolt) and put a nut and a bolt in and that's it. Very simple job and nigh on impossible to get wrong. Just remember they go under the insulation, all you may need to do is cut two small slits per side to feed the "hoops" through but nothing damages the car or seats.

Pop me a PM if you'd like these, alternatively dealers and online they're about £25 to £30 each.

Cheers

May 12th, 2019, 18:46	#1
br850 Member Last Online: Oct 21st, 2023 20:54 Join Date: Nov 2008 Location: Rotherham	Isofix I have an 04 S80 D5 and whilst the hanbook says the car has provision for Isofix child seat fittings I cannot see anything obvious behind the rear seats. Do I need to get some kind of bracket and where does it fit? Thanks __________________ Got an S80 now and feel all grown up.

May 16th, 2019, 12:34	#4
Turbodave VOC Member Last Online: Apr 13th, 2024 17:18 Join Date: May 2011 Location: Fife	Indeed, have two original Volvo brackets plus the nuts / bolts here. As has been said, simple job. 5mins per side and a 15mm and 17mm socket / spanners and that's it. Lift the rear sear base, place the bracket on the car body lined up with the pre-existing holes (passenger side uses the existing seat belt anchor bolt) and put a nut and a bolt in and that's it. Very simple job and nigh on impossible to get wrong. Just remember they go under the insulation, all you may need to do is cut two small slits per side to feed the "hoops" through but nothing damages the car or seats. Pop me a PM if you'd like these, alternatively dealers and online they're about £25 to £30 each. Cheers Last edited by Turbodave; May 16th, 2019 at 12:37.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

May 13th, 2019, 15:03	#2
CaptainSlow337 Senior Member Last Online: Mar 6th, 2020 09:54 Join Date: Oct 2014 Location: Southampton	Yes, you can buy them for around £25 and they just bolt in. Takes seconds.

May 16th, 2019, 12:12	#3
CaptainSlow337 Senior Member Last Online: Mar 6th, 2020 09:54 Join Date: Oct 2014 Location: Southampton	Turbodave is selling some too

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)