|
140/164 Series General Forum for the Volvo 140 and 164 cars |
Information |
|
just bought my first 144Views : 858 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jun 17th, 2009, 02:51 | #1 |
New Member
Last Online: Aug 31st, 2009 01:46
Join Date: Jun 2009
Location: kokomo
|
just bought my first 144
So I just bought my first volvo. I have a 1972 144E it has a b20f but someone has replaced the fuel injection with dual su carbs. It is also an automatic. I am considering swaping a weber 32/36 on in place of the su's. I have some weber experience as I have one on my 87 honda crx. What kind of fuel mileage will a 144 auto get in town and on the highway? I am already trying to figure out how I can get an overdrive auto in the car but volvo transmissions arent that easy to come by here I am going to check in to what it would take to put a GM 200r4 in to the car. I was also wondering if a bosch 009 dist from a vw can be put on the 144 as my stock dist is vac advance and it is disconnected. If anyone can give me any advise I welcome all input.
|
Jun 19th, 2009, 11:53 | #2 |
Trader Volvo in my veins
Last Online: Yesterday 20:01
Join Date: Dec 2004
Location: Anglesey
|
The 144 on twin su's set up with a manual box will do near 30 MPG. With the auto box I would say you are going to be looking at 25 ish on mixed driving.
OD auto as fitted to a 240 could be used but you will have to cut and twist the bellhousing. The prop will aslo have to be adjusted. Have you tried refitting the vac advance? |
Aug 16th, 2009, 04:36 | #3 |
New Member
Last Online: Aug 31st, 2009 01:46
Join Date: Jun 2009
Location: kokomo
|
well i got a great deal on an 009 so i am going to put it on. right now i am having a problem. I just put a new rear main seal in and now my trans wont shift in to 3rd. I saw somewhere something about the governor valve might cause this. The car has been sitting for about 2 months because of the rear main. How hard is it to get to the governor valve?
Last edited by kokomoguy; Aug 16th, 2009 at 04:42. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|