|
850 / S70 & V70 '96-'99 / C70 '97-'05 General Forum for the 850 and P80-platform 70-series models |
![]() |
|
C70 reverse camera locationViews : 240 Replies : 2Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
New Member
Last Online: May 9th, 2024 18:51
Join Date: Aug 2021
Location: ldn
|
![]()
hey all,
considering fitting a small reverse camera. i was thinking between the numberplate lights. anyone with a rear camera have any tips on fitting locations, or pictures. thanks |
![]() |
![]() |
![]() |
#2 |
Old Rocker
Last Online: Yesterday 22:23
Join Date: Dec 2016
Location: Tring
|
![]()
Ok, mine was the later, hardtop C70, but Hope this helps.
I mounted mine above the number plate, it was easy to route the cable so as to be hidden. Unfortunately the car’s now sold, so I can’t take more pics.
__________________
Just my opinion, please don't shoot me if it doesn't match yours! 2011 C70 D3 (now sold)and JZR 3 wheeler Last edited by Baxlin; Aug 9th, 2021 at 15:10. |
![]() |
![]() |
The Following User Says Thank You to Baxlin For This Useful Post: |
![]() |
#3 |
Old Rocker
Last Online: Yesterday 22:23
Join Date: Dec 2016
Location: Tring
|
![]()
This was my first attempt, while I didn’t use this camera in the end, because it was too large and ‘obvious’, it does show that I attached a thin strip of alloy to the camera, and trapped it behind the number plate. The same method was used on the smaller camera. It was easily adjusted by bending the alloy, and while it might seem Heath Robinson, it worked perfectly, and all that could be seen - see previous post - was the camera itself.
Another tip - I found that the LEDs in the camera weren’t bright enough at night, so I replaced the car’s reversing light bulbs with 21w. I argued that there’d be no problem of overheating the units, in view of the short the length of time they were ever lit.
__________________
Just my opinion, please don't shoot me if it doesn't match yours! 2011 C70 D3 (now sold)and JZR 3 wheeler |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|