Other XC90 Problem: Changing rear engine mount

[jagarciam]

Originally Posted by sreviz

Hello Guys Attached is the full guidance with photos for the rear mount replacement procedure.

Saravan

This has been one of the most useful post ever. Thanks a lot.

[Scottsmokes]

Thankyou Sreviz for taking the time to make this guide.
I've not done this job yet, but I now am hopeful.

[ampy]

Originally Posted by sreviz

Morning every one,
I managed to get a picture form Haynes.
Will someone help me to Jack up the car whether , with trolley jack on “A”- subframe and then axle stands on “D” (both sides)
And then where to jack up the engine for support in place. I see “J” is oil pan, can I support it there with wood, when changing the mount.
Then remove the two bolts on “B” ”(on each side) and then the 3 sub frame bolts “A”(on each side) to proceed.
Then I can see the rear mount bottom bolt bit in the lower end. Will supporting the engine and un removing all these bolts will it make easy to take out the mount promptly or Do I have to remove any other bolts please.
Any ideas will be much helpful.
Thank you
Saravan

I would be inclined to jack the car up at location "D" and use the axle stands at location "A" but just rear of the metal plate. Maybe use a piece of strong wood to protect floor. The reason being that you may end up have to drop the subframe slightly to access the rear engine mount better. If you have your axle stands at location "D" you will not be able to.