BSC Calibration how?

[Mordred]

The error message I've got from the icarsoft Diagnostic scanner is
ABS - 0112 "Body sensor cluster stability sensor (BSC) ...
Sensor not calibrated"

Couple of questions:
1. How do I calibrate this sensor ?
2. Do I need VIDA ?
3. Can it be done some other way disconnecting something, perhaps driving, or a process, steering turns etc.

This warning started happening after cranking the car until the battery was flat.

XC90 05 D5

Any help would be great.

[cheshired5]

Don't overly concern yourself with codes following system voltage issues.
Charge the battery, clear the code, take it for a run then read it again.

If the code returns, then worry.

[Mordred]

Looks like it needs some calibration activity, driven and tried resetting.
Still flags up. Suspect the constant cranking has wiped something.

[RS3100]

This might help (2nd section).

[cheshired5]

Originally Posted by Mordred

Suspect the constant cranking has wiped something.

Interestingly, Vida says the only 2 possible sources for BCM 0112 are a defective BCM or that interference or static has affected the BCM.

I would say to anyone with a slow starting D5 to find and fix the root cause rather than beating it into submission with extended cranking which can kill the expensive starter motor, the expensive battery as well as still leaving a problem which needs fixing.