Volvo Community Forum. The Forums of the Volvo Owners Club

Forum Rules Volvo Owners Club About VOC Volvo Gallery Links Volvo History Volvo Press
Go Back   Volvo Owners Club Forum > "Technical Topics" > 300/66 Series General > 300/66 Series Sales
Register Members CarsBlogs Help Calendar Mark Forums Read

Notices

Information
  • VOC Members: There is no login facility using your VOC membership number or the details from page 3 of the club magazine. You need to register in the normal way
  • AOL Customers: Make sure you check the 'Remember me' check box otherwise the AOL system may log you out during the session. This is a known issue with AOL.
  • AOL, Yahoo and Plus.net users. Forum owners such as us are finding that AOL, Yahoo and Plus.net are blocking a lot of email generated from forums. This may mean your registration activation and other emails will not get to you, or they may appear in your spam mailbox

Thread Informations

Volvo 340 B18FT Turbo project for sale

Views : 757

Replies : 2

Users Viewing This Thread :  

Reply
 
Thread Tools Display Modes
Old Jul 5th, 2019, 21:06   #1
Roger88
New Member
 

Last Online: Yesterday 17:48
Join Date: May 2019
Location: Cambridgeshire
Default Volvo 340 B18FT Turbo project for sale

Hi all,

I have not any pictures taken of recent state of the car but I bought this about nearly 2 years ago as a project with a broken gearbox.

The paintwork is not the best, one of the front wings is a different colour and previous owner I guess painted the rear passenger door black very terribly.

(You could matt black the whole car for a good cheap solution if not too fussed about paint work)

To be honest it was pretty shonked together with the turbo and fuel system setup.

It originally had a standard (I'm pretty sure) supra turbo which is a CT26.
very large turbo and bodged together manifold. (this CT26 turbo will come with the car)

I ended cutting off manifold at flanged and got them machined flat to make a manifold for a more suitable turbo.

engine compression test cold was literally 170psi across all cylinders, give or take 10 or less psi.

I did fit a gearbox with a welded diff to the 340 and refitted a stock propshaft as it had a dodgy Recoprop uprated propshaft which was the culprit im sure for destroying the case on the gearbox. (This car will also come with this dodgy Recoprop)

It also has a oil cooler mounted to front of car with a remote oil filter kit inside the engine bay.

It has a uprated paddle clutch installed aswell.

Springs were cut by previous owner.

Rear half of interior has been stripped with stock front seats still mounted.


It also has a set of banded steel wheels (14 inch if I remember).


To make this car run it will need:

A fuel system as I have removed swirl pot and aftermarket regulator and pumps as this is going to be used with my 940 project.

A exhaust manifold fabricating and a exhaust system fabricating.

Inlet manifold etc will need re-fitting (in boot of car)

It has stock engine management system from the Volvo 480 turbo with a RichMod ECU chip im pretty sure, it is a bit ancient technology so I would personally recommend buying a basic Link ECU and make it more tuneable.

It will obviously need a MOT.

This car has potential and for the price im asking I think its fair as the engines are not the cheapest these days and hard to find.
And also this car comes with bits and bobs to make it worth the price.


Asking price: 600 as I need it gone fast to make space for my 940 project.

These are the pictures from previous owner but I will get some pictures in the next few days.

If interested and want specific pictures of areas of the car just PM me or give me a call.

My phone number is [Admin removed number]

31519995_10211249855498030_4062220625932976128_n.jpg
31531009_10211249855258024_1771787882067918848_n.jpg
31472635_10211249855818038_5926965142318219264_n.jpg
31497052_10211249856058044_2423940135813906432_n.jpg

Cheers

Roger88

EDIT: This car is located in Cambridgeshire

Last edited by JamesV70R; Aug 17th, 2019 at 19:31. Reason: Removing phone number at request
Roger88 is offline   Reply With Quote
Old Aug 7th, 2019, 21:43   #2
Roger88
New Member
 

Last Online: Yesterday 17:48
Join Date: May 2019
Location: Cambridgeshire
Default

Bump!

I need this car gone!, if any interest it will give me more momentum to go to friends yard and take pictures as it stands today.

I can also do a compression test to verify the exact numbers as I can guarantee they are good numbers.

Cheers

Roger
Roger88 is offline   Reply With Quote
Old Aug 17th, 2019, 19:19   #3
Roger88
New Member
 

Last Online: Yesterday 17:48
Join Date: May 2019
Location: Cambridgeshire
Default

Sold!

Cheers

Roger88
Roger88 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 00:23.


Powered by vBulletin
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.