wanted - 240 door hinge

john h · Jan 9th, 2012, 22:20

Hi,

I'm looking for a good used hinge for a 240 right rear door; the lower hinge.

I need one with very little wear, having a strong, well-defined action on the check stops.

Any colour is fine.

Please PM me.

Thanks

John

240 · Jan 10th, 2012, 12:33

ive got a few silver ones, would need to get it taken off the door for you if you wish?

sunnyvic · Jan 10th, 2012, 21:00

Hi John hinge for drivers door of an 87 740

sunnyvic · Jan 10th, 2012, 21:08

John H i made a boo boo with last post,,Forum forgive me,,,i have a bottom hinge for front drivers door of a 740..would that be the same.The hinge is brand new in black primer spray yourself to suit if this is of any help i will look at part no tomorrow Wednesday..just trying to help regards sunnyvic

sunnyvic · Jan 11th, 2012, 11:15

John good morning Hinge part no is as follows,,9447269 made in germany volvo ,,look like 3bolt holes 1 side including 2 ajustable then on other half just 3 small bolt holes..so again Volvo Part No 9447269..regards sunnyvic

john h · Jan 11th, 2012, 12:14

Many thanks sunnyvic, PM sent

John

sunnyvic · Jan 11th, 2012, 13:46

John i have sent pm for you to make an offer,because i dont normally sell on the fORUM or purchase,just a fair offer is fine,,ok cheers sunnyvic

sunnyvic · Jan 12th, 2012, 17:46

John i have pm you twice to say NO its not enough,i sent one last night and another tonight.Remember i dont have to sell and the price on my receipt says 29pounds and 43pence plus vat and that was in 2001.Both my wife and i agreed that a proper price for a new item should be 35pounds including postage..I would suspect volvo prices would be higher nowadays,so thats the price,,ime sorry i cant go lower.if you think its to high then i would say go for a good s/hand one..regards sunnyvic

john h · Jan 13th, 2012, 11:36

Hi sunnyvic,

Sorry, it seems there might be a problem with PMs. I didn't get one of yours and perhaps you didn't receive mine. Repeating here just in case:

I understand fully. I'd happily pay £35 if I knew that the hinge would fit my car, but it's a 740 item so I'd be taking a risk that it would fit, so at that price I'll pass on your kind offer.

Many thanks anyway - no hard feelings!

Best wishes

John

Jan 9th, 2012, 22:20	#1
john h VOC Member Last Online: May 30th, 2024 11:13 Join Date: Jan 2007 Location: Huddersfield View Photos By: john h	wanted - 240 door hinge Hi, I'm looking for a good used hinge for a 240 right rear door; the lower hinge. I need one with very little wear, having a strong, well-defined action on the check stops. Any colour is fine. Please PM me. Thanks John __________________ XX

Jan 10th, 2012, 12:33	#2
240 BOB MY BIG OLD BUS Last Online: Jan 15th, 2014 01:06 Join Date: Apr 2010 Location: NORTH EAST	ive got a few silver ones, would need to get it taken off the door for you if you wish? __________________ ~ Never, ever, argue with an idiot. They'll drag you down to their level and beat you with experience ~

Jan 10th, 2012, 21:00	#3
sunnyvic VOC Member Last Online: May 24th, 2013 17:34 Join Date: Jan 2011 Location: caversham Berkshire	hinge Hi John hinge for drivers door of an 87 740

Jan 10th, 2012, 21:08	#4
sunnyvic VOC Member Last Online: May 24th, 2013 17:34 Join Date: Jan 2011 Location: caversham Berkshire	Hinge John H i made a boo boo with last post,,Forum forgive me,,,i have a bottom hinge for front drivers door of a 740..would that be the same.The hinge is brand new in black primer spray yourself to suit if this is of any help i will look at part no tomorrow Wednesday..just trying to help regards sunnyvic

Jan 11th, 2012, 11:15	#5
sunnyvic VOC Member Last Online: May 24th, 2013 17:34 Join Date: Jan 2011 Location: caversham Berkshire	hinge John good morning Hinge part no is as follows,,9447269 made in germany volvo ,,look like 3bolt holes 1 side including 2 ajustable then on other half just 3 small bolt holes..so again Volvo Part No 9447269..regards sunnyvic

Jan 11th, 2012, 12:14	#6
john h VOC Member Last Online: May 30th, 2024 11:13 Join Date: Jan 2007 Location: Huddersfield View Photos By: john h	Many thanks sunnyvic, PM sent John __________________ XX

Jan 11th, 2012, 13:46	#7
sunnyvic VOC Member Last Online: May 24th, 2013 17:34 Join Date: Jan 2011 Location: caversham Berkshire	hinge John i have sent pm for you to make an offer,because i dont normally sell on the fORUM or purchase,just a fair offer is fine,,ok cheers sunnyvic

Jan 12th, 2012, 17:46	#8
sunnyvic VOC Member Last Online: May 24th, 2013 17:34 Join Date: Jan 2011 Location: caversham Berkshire	hinge John i have pm you twice to say NO its not enough,i sent one last night and another tonight.Remember i dont have to sell and the price on my receipt says 29pounds and 43pence plus vat and that was in 2001.Both my wife and i agreed that a proper price for a new item should be 35pounds including postage..I would suspect volvo prices would be higher nowadays,so thats the price,,ime sorry i cant go lower.if you think its to high then i would say go for a good s/hand one..regards sunnyvic

Jan 13th, 2012, 11:36	#9
john h VOC Member Last Online: May 30th, 2024 11:13 Join Date: Jan 2007 Location: Huddersfield View Photos By: john h	Hi sunnyvic, Sorry, it seems there might be a problem with PMs. I didn't get one of yours and perhaps you didn't receive mine. Repeating here just in case: I understand fully. I'd happily pay £35 if I knew that the hinge would fit my car, but it's a 740 item so I'd be taking a risk that it would fit, so at that price I'll pass on your kind offer. Many thanks anyway - no hard feelings! Best wishes John __________________ XX Last edited by john h; Jan 13th, 2012 at 12:51.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)