|
Performance Volvo Cars A forum for those interested in any Volvo performance car from any era, FWD, RWD and AWD! |
Information |
|
Turbo wastegate actuatorViews : 746 Replies : 1Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Aug 6th, 2019, 20:05 | #1 |
Premier Member
Last Online: Today 09:38
Join Date: Aug 2008
Location: Newcastle
|
Turbo wastegate actuator
2004 V70 AWD R.
How do you remove the actuator? I can see two 12mm?? bolts on the can end, but at the thimble end the pin that attaches the actuator to the wastegate arm appears to be peined over. Does the rod unscrew from the thimble leaving the wastegate arm and thimble end attached to each other by the pin??. As you can see my locknut and thimble are badly corroded and stuck. Does anyone know at what pressure the actuator rod begins to move to open the wastegate. - I have read, on different sights its 4.4psi and also 0.6bar (8.8bar) - I have checked my own car and the rod began to move at approx. 6psi. Cheers Bob |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|