Air temp issue on 2009 S40 SE 2.0D

[1mellofello]

VIDA read out 27/03/17
Hi folks

I managed to find a local garage with VIDA software and DICE equipment and got a printout of the codes it found- £25.
Here's a photo of the read out

https://www.dropbox.com/s/jd451afxsw...HDR~2.jpg?dl=0

They said it doesn't indicate what the A.C.problem is and it will need to go into a proper Volvo dealership for a further check to see if it needs a software upgrade- £82 + cost of upgrade if applicable.

[1mellofello]

https://www.dropbox.com/s/jd451afxsw...HDR~2.jpg?dl=0

[cheshired5]

The readout looks like it's confirming a dodgy flap position so did you ask them to do the calibration as suggested at the start of the thread?
It would have taken them 1 minute to do.

[1mellofello]

So they could have sorted it there and then with their own equipment? Where does it say on the read out about the faulty position? I don't know what I'm looking for and it seems they don't either.

I did ask them about recalibrating and they've referred me to Volvo who would have correct software update as I said.

[cheshired5]

Originally Posted by 1mellofello

So they could have sorted it there and then with their own equipment? Where does it say on the read out about the faulty position?

CCM 0071 The 3rd fault down listed as active.

A recalibration may fix it, it may not but for them not to at least try whilst the car is there is a bit daft.

[1mellofello]

From what I gathered at the time I think maybe they're out of their depth with this one. I did ask them if it was maybe a damper motor problem from what people have said on this thread but they said no and that dampers are to do with the wheels or something to that effect err :err so can't say I'll be going back to them in future.

What does DTC mean?

[1mellofello]

Diagnostic Trouble Code?

What does it mean if it's found active?