|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
V70 d5 185bhp 2006 please help this frustrated engineerViews : 1645 Replies : 23Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jul 5th, 2019, 23:21 | #21 |
Senior Member
Last Online: Yesterday 07:04
Join Date: May 2017
Location: martock
|
Have you checked that the turbo actuator is working
__________________
|
Jul 15th, 2019, 15:13 | #22 |
New Member
Last Online: Jul 15th, 2019 15:13
Join Date: Jun 2019
Location: Sheffield
|
i would be unsure to tell how the actuator is working, ie when it boost, it is working, when it goes into limp it wont be ?
i am going to check the ECU next, i cant see any sensor in the intake manifold but will look harder lol |
Jul 15th, 2019, 15:44 | #23 |
Experienced Member
Last Online: Today 22:26
Join Date: Jun 2007
Location: L/H side
|
you may not have a boost sensor on the inlet manifold it depends which year . You would see it if it were there ,
__________________
My comments are only based on my opinions and vast experience . |
Jul 15th, 2019, 21:16 | #24 |
Senior Member
Last Online: Yesterday 07:04
Join Date: May 2017
Location: martock
|
The actuator should move when you turn engine on. Mine had similar issues to yours it would boost then nothing. Mine is a 07 185 bhp v70. I undid the circlip that holds actuator onto the turbo to make sure the vanes were free which mine were then took actuator off took it apart. One side has cogs etc which can break,mine was goosed electrics. So got a remanufactured one. Maybe not your issue but at least you can rule it out. I had codes boost high and low. Maybe someone can explain it better than me.
__________________
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|