Sunroof fault XC60

Gin99 · Feb 28th, 2019, 14:35

Hi, ive searched for this problem but cant find any answers, so im hoping someone here can help.

Have a problem with the sunroof where is not opening / closing properly.
It (usually) opens to tilt, then slides 1, 2, 3, inches at a time, with the switch held on, and the same when closing.

Sometimes it just doesnt open at all, but it will often open (intermittently as above) if I switch off ignition and start again, it seems to reset something.

The shade/sunscreen doesnt open or close at all.

I have taken down the lining, and wound the mechanisms manually and they run smoothly, although with a bit of resistance, but nothing more than expected. Everything looks clean in the runners etc.

I have disconnected the front motor, and switched on and it runs the same (a second or so at a time)

I have also run a Launch x431 on it but cant find any faults or resets.

2010/11 model

I have also disconnected the battery to reset, and tried the key in/out unlock doors calibration reset and no difference.

Many thanks in advance.

cardiomike · Mar 23rd, 2019, 12:19

COULD IT BE THE ACTUAL SWITCH CONTACTS-? if everything else is working - or the module related to the roof

Feb 28th, 2019, 14:35	#1
Gin99 New Member Last Online: Mar 12th, 2019 23:17 Join Date: Oct 2018 Location: London	Sunroof fault XC60 Hi, ive searched for this problem but cant find any answers, so im hoping someone here can help. Have a problem with the sunroof where is not opening / closing properly. It (usually) opens to tilt, then slides 1, 2, 3, inches at a time, with the switch held on, and the same when closing. Sometimes it just doesnt open at all, but it will often open (intermittently as above) if I switch off ignition and start again, it seems to reset something. The shade/sunscreen doesnt open or close at all. I have taken down the lining, and wound the mechanisms manually and they run smoothly, although with a bit of resistance, but nothing more than expected. Everything looks clean in the runners etc. I have disconnected the front motor, and switched on and it runs the same (a second or so at a time) I have also run a Launch x431 on it but cant find any faults or resets. 2010/11 model I have also disconnected the battery to reset, and tried the key in/out unlock doors calibration reset and no difference. Many thanks in advance.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Mar 23rd, 2019, 12:19	#2
cardiomike Junior Member Last Online: Mar 30th, 2019 17:37 Join Date: Sep 2016 Location: stornoway	COULD IT BE THE ACTUAL SWITCH CONTACTS-? if everything else is working - or the module related to the roof

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)