|
AWD Discussion A forum dedicated to the AWD systems fitted to Volvo cars. |
![]() |
|
oil changing of the awd systemViews : 2007 Replies : 7Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Master Member
Last Online: Apr 29th, 2024 14:20
Join Date: Feb 2013
Location: South wales
|
![]()
hi all,
got an MY00 v70xc P2 and having got the local garage to check the awd is working by putting it on their 2 poster to see if all 4 wheels go round - good start. now, the transfer box (or what ever you call them) when should the oil in them be changed? what grade to use? where and how is it done? is it something that can be done with ramps on the drive? my guess is volvo say sealed for life - but like their auto boxes which are sealed for life they don't say how long life is! so id rather change the oil now than wait and have to repair / rebuilt them! ta Jon
__________________
Who said Volvos were build to last? 2.4t V70XC Auto 2001 165k D5 185 XC70 M66 2006 202k |
![]() |
![]() |
![]() |
#2 |
Master Member
Last Online: Sep 29th, 2022 20:46
Join Date: May 2007
Location: Leeds
|
![]()
Good luck with that
![]() It's called the bevel gear on our cars, yanks call it something else but they're thick so don't count ![]() There's no oil drain hole in the unit, you need to get an oil vac in there and I never managed it. I found the casing very tight to the gears and so couldn't get any pipe in to reach the oil. There is a mod to drill through one of the mounting studs into the case to create a drain, but I'm not gonna try it on a cast alloy case that'll cost over a grand to replace if it goes wrong.... AFAIK the only way to drain it is to remove it from the car and tip it upside down to drain out of the level/filling hole. Same with the rear diff. I do agree that it should be changed, the thought of oil not being changed for 100k+ miles is horrifying to me ![]()
__________________
Defected to BMW. 335d xdrive. |
![]() |
![]() |
The Following User Says Thank You to TiredGeek For This Useful Post: |
![]() |
#3 |
Master Member
Last Online: Apr 29th, 2024 14:20
Join Date: Feb 2013
Location: South wales
|
![]()
thanks for your reply tiredgeek.
good old volvo engineering, sealing it for life, as usual. i do agree at 100k miles it be good to change it, just done my autobox oil and that was horrible and black. I shall have a chat to our local garage and see what they advice. how easy are they to remove, out of interest?
__________________
Who said Volvos were build to last? 2.4t V70XC Auto 2001 165k D5 185 XC70 M66 2006 202k |
![]() |
![]() |
![]() |
#4 |
Master Member
Last Online: Sep 29th, 2022 20:46
Join Date: May 2007
Location: Leeds
|
![]()
Short answer: not.
I'm gonna have my splined coupling and bevel gear oil replaced when the clutch is done. It'll add to the cost, but as the clutch bill comes to around £1600 it's not that much different, mainly labour charges.
__________________
Defected to BMW. 335d xdrive. |
![]() |
![]() |
![]() |
#5 |
VOC Member
|
![]()
Depends how handy you are with spanners I suppose - its just nuts and bolts at the end of the day.
Jack up drivers side of car (front and rear) so that you can remove prop shaft. Guide for that here ![]() http://www.volvoforums.org.uk/showthread.php?t=176925 Then you'll need to undo the front offside hub nut. Probably best to get a 3/4 breaker bar with the 36mm socket to help shift it as it will be tight. Once thats undone, raise/support the front of the car, axle stands are certainly needed, take off the front wheels. You'll need to remove the drivers side driveshaft, then you should be able to disconnect the bevel gear, 5 bolts I think. If you need to do any turbo work, now would be your chance to get to it! I'll be taking my bevel gear off over the next few weeks - i'll keep the camera handy and take some snaps of it.
__________________
Current; Ford Transit mk6 Previous; '98 V70XC, '97 V40 2.0, '94 855 T5,'02 S60 D5,'97 V70 AWD,'90 740 Turbo,'97 855 T5 Auto,99 V70 10V,'04 S80 D5,'99 V70R AWD'01 S60 T5 |
![]() |
![]() |
The Following 2 Users Say Thank You to Paffel For This Useful Post: |
![]() |
#6 |
Master Member
Last Online: Apr 29th, 2024 14:20
Join Date: Feb 2013
Location: South wales
|
![]()
paffel any guides on the bevel gear removal would be great!
__________________
Who said Volvos were build to last? 2.4t V70XC Auto 2001 165k D5 185 XC70 M66 2006 202k |
![]() |
![]() |
![]() |
#7 |
Senior Member
Last Online: Jun 2nd, 2019 22:26
Join Date: Jul 2011
Location: Sheerness, Kent
|
![]()
I work for a JCB dealership and often see large excavators and telehandlers that have not had oil changes in there axles or slew gearboxes for many years. When they are eventually drained the oil is always spotlessly clean. This only applies to gearboxes where a straight forward reduction or bevel gear system is fitted. I can understand Volvo's sealed for life policy on these units. I do understand the importance of oil changes, especially when wet clutch/brake and viscous systems are involved but if it is "just" a gearbox then personally i'd leave it.
I know it's a different application but these gearboxes also see large amounts of stress and heat with no reliablity issues. |
![]() |
![]() |
The Following User Says Thank You to coughlanc For This Useful Post: |
![]() |
#8 | |
Experienced Member
Last Online: Yesterday 16:06
Join Date: Jun 2007
Location: L/H side
|
![]() Quote:
Check the level and cleanliness of course , but as long as it is clean , brown with no grey colouring it will be fine . If you have a bearing go it will contaminate the oil with metal particles of course . And relating to auto boxes , volvo dont say they are sealed for life , they actauly have been recommending for nearly 2 decades that the oil is changed if the car is used for towing or arduous work , every 36000-48000 miles or so . I would do this anyway as it will keep your gearbox going for a long time .
__________________
|
|
![]() |
![]() |
The Following 2 Users Say Thank You to Clan For This Useful Post: |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|