Bailey Motorsport DV36 BOV and fitting kit.

budd · Sep 11th, 2009, 19:15

For Sale Bailey DV36 BOV and FK80 fitting kit for 850 T5/R

I've no doubt it will fit any turbo car with a 2.00" boost pipe

. Fitting kit contains 2.00" (50.8mm) alloy mounting T piece (part no ATP26/2.00) Bailey Branded reinforced Silicone mounting hose , hose clips and blue silicone vacuum hose.(Basically all the bits in the pic)

seen here on my 850R

These RRP on this is £152.15 (although usually they are £120>£130 plus P&P if you shop about)
This Bov is used but in excellent condition and full working order I'm a after £65 delivered or £60 collected from Wakefield West Yorkshire, (roughly 1/2 new price)

I don't want to get into a debate on the benefits or necessity of after market dump valves in general, but if you want one you may as well fit a good one, and these are as good as any!!!

Bailey product blurb below.

'Bailey Motorsport introduced the Piston design Dump Valve in 1977 after many years of exhaustive testing on both fast road and high powered race cars.
The Bailey Motorsport Piston design valve has many advantages over the original diaphragm dump valve including faster reaction times, increased boost capacity and in the case of the 'EVO' valve the ability to perform on vehicles with airflow meters which was not possible with the diaphragm type.

Bailey 'EVO' Twin Piston Dump Valves are designed for Turbo Charged vehicles with Fuel Injection and an airflow meter or metering unit.
The ingenious second piston on the Bailey Dump valve allows your vehicle to idle perfectly whilst allowing the fuel mixture to remain unchanged which in turn resolves all the running problems traditionally associated with diaphragm valves.
The Bailey 'EVO' Twin Piston Dump Valve has a 25mm push on base and comes supplied with a straight 4mm polymer push on vacuum/boost connection. This twin piston dump valve has a 60psi boost capacity.
The VENTURI Upgrade Dump Valve (this valve) is the new breed of atmospheric valves. The VENTURI features a single trumpet outlet on the side of the valve increasing airflow which in turn gives a more agressive 'dumping' sound.

All Bailey Dump Valves are manufactured in aircraft quality aluminium alloy. They use stainless steel bolts and rods with lightweight polymet pistons with special state of the art seal technology. All Bailey Piston Dump Valves are designed to be re-buildable for even greater longevity.
Complete with appropriate fitting kit'

bambam27 · Sep 24th, 2009, 00:12

pm sent let me no when u get it thanks

budd · Sep 24th, 2009, 13:49

BOV now sold, thanks for all the interest

Sep 11th, 2009, 19:15	#1
budd Junior Member Last Online: Jan 21st, 2010 22:04 Join Date: Jul 2009 Location: wakfield	Bailey Motorsport DV36 BOV and fitting kit. For Sale Bailey DV36 BOV and FK80 fitting kit for 850 T5/R I've no doubt it will fit any turbo car with a 2.00" boost pipe . Fitting kit contains 2.00" (50.8mm) alloy mounting T piece (part no ATP26/2.00) Bailey Branded reinforced Silicone mounting hose , hose clips and blue silicone vacuum hose.(Basically all the bits in the pic) seen here on my 850R These RRP on this is £152.15 (although usually they are £120>£130 plus P&P if you shop about) This Bov is used but in excellent condition and full working order I'm a after *£65 delivered* or *£60 collected* from Wakefield West Yorkshire, (roughly 1/2 new price) I don't want to get into a debate on the benefits or necessity of after market dump valves in general, but if you want one you may as well fit a good one, and these are as good as any!!! Bailey product blurb below. 'Bailey Motorsport introduced the Piston design Dump Valve in 1977 after many years of exhaustive testing on both fast road and high powered race cars. The Bailey Motorsport Piston design valve has many advantages over the original diaphragm dump valve including faster reaction times, increased boost capacity and in the case of the 'EVO' valve the ability to perform on vehicles with airflow meters which was not possible with the diaphragm type. Bailey 'EVO' Twin Piston Dump Valves are designed for Turbo Charged vehicles with Fuel Injection and an airflow meter or metering unit. The ingenious second piston on the Bailey Dump valve allows your vehicle to idle perfectly whilst allowing the fuel mixture to remain unchanged which in turn resolves all the running problems traditionally associated with diaphragm valves. The Bailey 'EVO' Twin Piston Dump Valve has a 25mm push on base and comes supplied with a straight 4mm polymer push on vacuum/boost connection. This twin piston dump valve has a 60psi boost capacity. The VENTURI Upgrade Dump Valve (*this valve) is the new breed of atmospheric valves. The VENTURI features a single trumpet outlet on the side of the valve increasing airflow which in turn gives a more agressive 'dumping' sound. All Bailey Dump Valves are manufactured in aircraft quality aluminium alloy. They use stainless steel bolts and rods with lightweight polymet pistons with special state of the art seal technology. All Bailey Piston Dump Valves are designed to be re-buildable for even greater longevity. Complete with appropriate fitting kit' Last edited by budd; Sep 11th, 2009 at 19:17.*

Sep 24th, 2009, 00:12	#2
bambam27 Master Member Last Online: Mar 12th, 2011 20:25 Join Date: Sep 2009 Location: newport	pm sent let me no when u get it thanks

Sep 24th, 2009, 13:49	#3
budd Junior Member Last Online: Jan 21st, 2010 22:04 Join Date: Jul 2009 Location: wakfield	BOV now sold, thanks for all the interest

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)