Clunk when shifting between D N R

[sam1]

I think this topic may have been covered multiple times, however I can't seem to find a video showing the problem all just described as a click or clunk...! So here is a video of my click/clunk when shifting between R N D. The nearside driveshaft feels slightly loose, but there do not appear to be any bolts to tighten it.... help!
THanks all.

https://www.youtube.com/watch?v=VkRq...ature=youtu.be



2007 V70 2.4D TF80sc auto

[4candles]

Originally Posted by sam1

I think this topic may have been covered multiple times, however I can't seem to find a video showing the problem all just described as a click or clunk...! So here is a video of my click/clunk when shifting between R N D. The nearside driveshaft feels slightly loose, but there do not appear to be any bolts to tighten it.... help!
THanks all.

https://www.youtube.com/watch?v=VkRq...ature=youtu.be



2007 V70 2.4D TF80sc auto

I can't view the clip because of my dying XP antique.
Driveshafts have one bolt each and its on the outer end behind the centre cap (Wheel Logo), these loosen but usually click rather than clunk, and sometimes even throw up an ABS warning light.
If the bolt/s are tight (both sides) then one of more of your CV joints may be worn.
Torque setting i can't recall but try 35NM, but they are stretch bolts so may need replaced.

[sam1]

hey, thanks...i did tighten them maybe 2000 miles ago... maybe ill replace them. I do get an abs/dtsc warning light every now and again, usually if accelerating hard and one of the front wheels slips on a drain lid or something. sometimes even at slow speed manoeuvring.... research continues!