Front wheel camber.

[MisterGee19]

So I got round to doing the ABS reluctor rings over the weekend. Although like a bit of a muppet I didn’t make any marks before removing the strut bolts.
I only ensured the hub was “pushed back” against the strut.. which I guess will give some negative camber. I have bilstien b6 struts and I would say they have a couple of mm adjustment in the top bolt-hole.

If I take the car for a 4wheel alignment, will they even adjust camber settings if they are out?

Edit -oops wrong section… can a mod move please?

[Clan]

Originally Posted by MisterGee19

So I got round to doing the ABS reluctor rings over the weekend. Although like a bit of a muppet I didn’t make any marks before removing the strut bolts.
I only ensured the hub was “pushed back” against the strut.. which I guess will give some negative camber. I have bilstien b6 struts and I would say they have a couple of mm adjustment in the top bolt-hole.

If I take the car for a 4wheel alignment, will they even adjust camber settings if they are out?

Edit -oops wrong section… can a mod move please?

The camber is not officially adjustable .. the very slight movement in the holes make very little difference on the figure..