Engine: D5: - I.A.T sensor location????

Scottish s60 guy · Apr 12th, 2012, 18:57

Hello all, I'm brand new to the site and this is my 1st post, I would be very great full if somebody could help me out, ,,, basically I'm asking if somebody can tell me where the I.A.T sensor is located on my 2003 Volvo d5,, if someone can answer this It would be very much appreciated. Thanks

Clan · Apr 12th, 2012, 19:31

Hello! It is part of the air mass meter .

Scottish s60 guy · Apr 13th, 2012, 01:10

Hello, thanks for getting back to me, but can I ask if your certain about it being built into the maf??? It's jst I was quoted separate prices from a parts company which makes me think it is an individual part and not built into the maf???? If u could let me know that would be great,, thanks again.

RAN60 · Apr 13th, 2012, 08:08

Its Definately in the MAF 100%

If you take the MAF out of the housing (undo the two torx screws) you will see a little thermistor attached to the side. That is your IAT sensor, you then also have a small metal plate at the bottom which is your air flow sensor.

Hope that helps!

Apr 12th, 2012, 18:57	#1
Scottish s60 guy New Member Last Online: Apr 13th, 2012 10:41 Join Date: Apr 2012 Location: Hamilton	I.A.T sensor location???? Hello all, I'm brand new to the site and this is my 1st post, I would be very great full if somebody could help me out, ,,, basically I'm asking if somebody can tell me where the I.A.T sensor is located on my 2003 Volvo d5,, if someone can answer this It would be very much appreciated. Thanks

Apr 12th, 2012, 19:31	#2
Clan Experienced Member Last Online: Yesterday 22:35 Join Date: Jun 2007 Location: L/H side	Hello! It is part of the air mass meter . __________________ My comments are only based on my opinions and vast experience .

Apr 13th, 2012, 01:10	#3
Scottish s60 guy New Member Last Online: Apr 13th, 2012 10:41 Join Date: Apr 2012 Location: Hamilton	Hello, thanks for getting back to me, but can I ask if your certain about it being built into the maf??? It's jst I was quoted separate prices from a parts company which makes me think it is an individual part and not built into the maf???? If u could let me know that would be great,, thanks again.

Apr 13th, 2012, 08:08	#4
RAN60 Master Member Last Online: Mar 30th, 2024 07:50 Join Date: Jul 2009 Location: Wales	Its Definately in the MAF 100% If you take the MAF out of the housing (undo the two torx screws) you will see a little thermistor attached to the side. That is your IAT sensor, you then also have a small metal plate at the bottom which is your air flow sensor. Hope that helps!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)