Underseal

[Burdekin]

Originally Posted by morwenna240

Well, u've certainly got rid of all the rust on that one! Ok, i'll get it stripped underneath, an see what looks best, from your options. Is that the gold car?
Thanks so much for the info, between you, Ben an Simon, i shall have a decent car. NEXT !

Let me know if you need any info on prep or choosing coatings. I buy the Jotun paints from SML paints and coatings online. Good to deal with. The Jotun 2k polyurethane paints are excellent for suspension parts and the like as well. Jotamastic 87 as the primer and topcoat with Hardtop AX as the topcoat.

Hope I haven’t just made the project a lot more work.

This is my Amazon but doing some work on her.

[morwenna240]

Very probably u have, but it's all for the good. My previous regime was: angle-grinder wire brush, rust convert, red oxide, Tetraseal. These Jotun paints aren't going to be 10 bob a tin, i have no doubt.
Just trying to chivvy the welder on a bit, it's not helped by car not driving, has to push into garage, over uneven cobbles, between servicing moderns.
There's a dearth of good welders, now, unless u go to a "Restoration" type place, an pay 80 an up p/h.

[Burdekin]

Originally Posted by morwenna240

Very probably u have, but it's all for the good. My previous regime was: angle-grinder wire brush, rust convert, red oxide, Tetraseal. These Jotun paints aren't going to be 10 bob a tin, i have no doubt.
Just trying to chivvy the welder on a bit, it's not helped by car not driving, has to push into garage, over uneven cobbles, between servicing moderns.
There's a dearth of good welders, now, unless u go to a "Restoration" type place, an pay 80 an up p/h.

The Jotun paints are really good value just sometimes the minimum size can be too big. They are a industrial paint but you could spray the car with Hardtop AX and you would never know, it is good quality stuff.

[AndrewBrown]

https://www.rust.co.uk/

look at this stuff really good comprehensive website

they have done stuff for the lifeboat service before now, the trucks they drive in the sea off the beaches to do life boat stuff

[morwenna240]

Oh dear, too much product info! Looked at their site, myriad products! Can someone make me a stainless steel car, pretty please?!

Ok, thanks for that. I'll decide on a course of action an stick to it.

[Burdekin]

Originally Posted by AndrewBrown

https://www.rust.co.uk/

look at this stuff really good comprehensive website

they have done stuff for the lifeboat service before now, the trucks they drive in the sea off the beaches to do life boat stuff

Their epoxies are Jotun.

[Underdrive]

Originally Posted by morwenna240

Oh dear, too much product info! Looked at their site, myriad products! Can someone make me a stainless steel car, pretty please?!

Ok, thanks for that. I'll decide on a course of action an stick to it.

DeLorean? Stainless.

[morwenna240]

Ah, yes. Terrible engine, tho, an no room for a deerhound!

[Underdrive]

Originally Posted by morwenna240

Ah, yes. Terrible engine, tho, an no room for a deerhound!

You will have to live with the tin worm then.

[morwenna240]

Non! All will be well.