|
Information |
|
CAM I help you? Redblock cams for sale.Views : 2114 Replies : 15Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jun 9th, 2014, 19:56 | #1 |
Junior Member
Last Online: Oct 9th, 2023 22:53
Join Date: Nov 2007
Location: Sunderland
|
CAM I help you? Redblock cams for sale.
Hi,
Having a bit of a garage clearout, I found I had more than a few spare cams tucked away. Here they are: From left to right; H,A,A,A,T, then an intermediate shaft to drive the block mounted dizzy (this is only of use if you want to run one of the non-slotted cams in a later brick). All in lovely condition with no visible wear on the lobes. I'd like £60 each for the slotted 'A' cams, £50 for the unslotted 'A', £10 for the 'T' grind, and £120 for the incredibly rare 'H'. Also, I have this neat modified cam pulley which allows you to change the cam's position relative to the crank: |
Jun 12th, 2014, 00:48 | #2 |
Junior Member
Last Online: Oct 9th, 2023 22:53
Join Date: Nov 2007
Location: Sunderland
|
Unslotted A cam SOLD
H cam and aux shaft SOLD Both sold in the 200 series section, come on 940 owners, wake up your B230FT and FK models with a cam which actually opens the valves a bit! |
Jun 15th, 2014, 21:47 | #3 |
Member
Last Online: Sep 20th, 2014 09:43
Join Date: Jun 2014
Location: Maidstone
|
I'm new...forgive me...I've got a 940lpt which cam would i benefit from?
|
Jun 16th, 2014, 14:58 | #4 |
Junior Member
Last Online: Oct 9th, 2023 22:53
Join Date: Nov 2007
Location: Sunderland
|
|
Jun 20th, 2014, 11:26 | #5 |
Senior Member
Last Online: Nov 16th, 2019 00:02
Join Date: May 2013
Location: coventry
|
Would you do a 'A' for £50 delivered?
Cheers |
Jun 20th, 2014, 13:02 | #6 |
Junior Member
Last Online: Oct 9th, 2023 22:53
Join Date: Nov 2007
Location: Sunderland
|
|
Jun 20th, 2014, 18:06 | #7 |
Senior Member
Last Online: Nov 16th, 2019 00:02
Join Date: May 2013
Location: coventry
|
Ok, deal. Im assuming all the lobes are in good condition with no wear in the hardened surface?
|
Jun 20th, 2014, 18:08 | #8 |
Senior Member
Last Online: Nov 16th, 2019 00:02
Join Date: May 2013
Location: coventry
|
Sorry i know you've kind of answered that already but could you confirm. Tar
|
Jun 21st, 2014, 01:04 | #9 |
Junior Member
Last Online: Oct 9th, 2023 22:53
Join Date: Nov 2007
Location: Sunderland
|
Not a problem,
there is no significant wear on any of the lobes of either 'A' cam, this would typically present itself as a dome shaped discolouration towards the highest point on the lobe. These Volvo cams do seem to be extraordinarily hardy, all the ones I've had have been almost mirror-like in smoothness. No worries about wear. |
Jun 21st, 2014, 08:42 | #10 |
Senior Member
Last Online: Nov 16th, 2019 00:02
Join Date: May 2013
Location: coventry
|
Thanks mate, I can do paypal or bank transfer which ever you prefer.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|