|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
Injectors not workingViews : 320 Replies : 0Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jul 30th, 2022, 18:32 | #1 |
New Member
Last Online: Apr 16th, 2023 16:59
Join Date: Jun 2022
Location: Sandnes
|
Injectors not working
Hello
I have volvo C30 1,6d 2007 with some problems Volvo vida and dice is used when diagnosing Engine is cranking, there is fuel pressure on the rail, but the injectors are not firing. I have measured continuity on the connections from the ECM/ECU to the injectors, i have also measured for shorts to ground/positive to injector wirings. The resistance of the injector coils are around 0.2 ohms All fuses are OK and the relay for ECM is also good. When cranking and ignition the voltage on the injectors are 3V Volvo vida gives me "Faulty signal" on all injectors. Codes: ECM-2310 injector cyl 1 - Faulty signal ECM-2320 injector cyl 2 - Faulty signal ECM-2330 injector cyl 3 - Faulty signal ECM-2340 injector cyl 4 - Faulty signal BCM-0101 Communication between control modules. Communication problems with the engine control module (ECM) I can read live values of the ECM so i dont know how is not working The car had recently had its DPF filter replaced, i dont know how it could be affected. i just parked the car and started it two days later and it would not work, i have also recharged the battery. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|