|
XC90 '02'15 General Forum for the P2-platform XC90 model |
Information |
|
12v charger/power fuse locationViews : 876 Replies : 15Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Nov 19th, 2017, 11:09 | #1 |
Member
Last Online: Apr 10th, 2021 07:58
Join Date: Nov 2017
Location: Dorsetshire
|
12v charger/power fuse location
The 12v charger points in the car are not working, I suppose its most likely a fuse? Please can someone tell me which fuse and where to locate it, I tried the handbook but found every fuse listed apart from this one.
Car is a 2007 V8. Many thanks, Stu. |
Nov 19th, 2017, 11:40 | #2 |
Premier Member
Last Online: Jan 15th, 2024 17:24
Join Date: Jun 2010
Location: Bury St Edmunds
|
F11 15A behind the passenger knee roll.
__________________
Greg |
Nov 19th, 2017, 18:58 | #3 |
Member
Last Online: Apr 10th, 2021 07:58
Join Date: Nov 2017
Location: Dorsetshire
|
Many thanks Greg, will sort it tomorrow.
Cheers, Stu |
Nov 19th, 2017, 23:22 | #4 |
Junior Member
Last Online: Yesterday 13:29
Join Date: Nov 2016
Location: MEXBOROUGH
|
Hi thats the fuse i wired dash cam upto comes on with ignition if you look on dash cam post this week somebody has put fuse board diagram up on page its fuse 11 in drivers side foot well
|
Nov 19th, 2017, 23:32 | #5 |
Volvo Driver
Last Online: Today 10:12
Join Date: Mar 2016
Location: Basingstoke
|
"passenger knee roll" = "drivers side foot well" ?????
Can someone explain the difference/commonality ?? Cheers Dave |
Nov 20th, 2017, 09:31 | #6 |
Premier Member
Last Online: Jan 15th, 2024 17:24
Join Date: Jun 2010
Location: Bury St Edmunds
|
I think it is LHD/RHD confusion. Its back there somewhere!
__________________
Greg |
The Following User Says Thank You to gmonag For This Useful Post: |
Nov 20th, 2017, 18:03 | #7 |
Member
Last Online: Apr 10th, 2021 07:58
Join Date: Nov 2017
Location: Dorsetshire
|
On my RHD car, these fuses are in the footwell of the driver's side if that helps. You need to remoove the two screws to get the cover off and it all then drops down. Bit of a pain to access.
|
The Following User Says Thank You to Stu V8 2007 For This Useful Post: |
Nov 21st, 2017, 10:39 | #8 |
Member
Last Online: Apr 10th, 2021 07:58
Join Date: Nov 2017
Location: Dorsetshire
|
Sadly I still need a little help with this one.
OK so we have the three 12v sockets. The one in the boot was working, however the middle one and the front one were not. I changed the fuse which had indeed blown (so I'm not sure why the boot socket was working it one fuse is supposed to control all three). (F11 15A under the dash, driver's side). Now the boot one still works as before, and great now the middle one works. However, the front one still doesn't. What am I doing wrong?! |
Nov 21st, 2017, 10:44 | #9 |
Member
Last Online: Apr 20th, 2024 11:41
Join Date: Apr 2006
Location: Wakefield
|
I I believe the boot one is permanent live other 2 are controlled via ignition
|
Nov 21st, 2017, 10:48 | #10 | |
Premier Member
Last Online: Today 17:32
Join Date: Mar 2013
Location: Yorkshire man living in County Durham
|
Quote:
Last edited by nu11eaf; Nov 21st, 2017 at 10:53. |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|