I Have Returned...

[Laird Scooby]

Originally Posted by Foeux

If you find some rear clusters, I'd be interested.

Do we know if it was drop links or arb bushes I failed on?

Cheers,

F

Check mileage recorded at test, MOT expiry date, defects and advisories, and view test certificate
Date tested 23 March 2020
Pass
View test certificate
Mileage 195,720 miles
MOT test number 2528 7046 9900
Test location
View test location
Expiry date 22 March 2021
Monitor and repair if necessary (advisories):

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

From the online MoT History of your car ^^^^^^^ the clue is in the words "pin or bush" which is going to be the drop-links.

If it was the D-bushes on the bar to chassis mount, it would simply be "bush" but out of the two, taking a guess, the drop-links wear quicker so i'd go for them.

Easy answer is look underneath, locate the drop-links and see if they look new which they probably will.

[360beast]

Stick your head under the car and have a look, most likely it is the bushes that clamp on to the ARB as I have never worked on a 940 where they aren't splitting open!

I think one of the tail lights is broken (N/S) but the O/S one looked okay.

I will get my verniers out tomorrow Dave and measure for you.

[Laird Scooby]

Thanks Luke!

[360beast]

Front is 22mm and rear is 16mm

[Laird Scooby]

Originally Posted by 360beast

Front is 22mm and rear is 16mm

Thanks Luke, i'll try and measure the front one on mine shortly. If it happens i can measure the rear, i'll do that too!

[360beast]

Originally Posted by Laird Scooby

Thanks Luke, i'll try and measure the front one on mine shortly. If it happens i can measure the rear, i'll do that too!

I think the rear should be the same as it came off the same sort of car ie 940 turbo.

[Laird Scooby]

Originally Posted by 360beast

I think the rear should be the same as it came off the same sort of car ie 940 turbo.

I'll find out soon Luke, just about to take the hound for her daily exercise and i'll take my digital "Very-Near Gauge" with me. The way i park the front is usually a bit higher off the ground than normal so should be able to sneak in with the Vernier without having to crawl under.

[Laird Scooby]

Couldn't park in my usual spot for walkies Luke so i'll have to have a look and measure tomorrow, need to get underneath to check something on the middle box so will measure the rear one as well while i do that and up front need to check the O/S/F sensor so again, will check the front ARB size then.

[Foeux]

Question for you all.

My bus has roof rails fitted but seems to have 'evidence' of a gutter mounted rack too.

Do the 'trade' racks fit above the standard roof rails or is it a 'suck it and see' thing?

Cheers,

F.

[nutco]

Originally Posted by Foeux

Question for you all.

My bus has roof rails fitted but seems to have 'evidence' of a gutter mounted rack too.

Do the 'trade' racks fit above the standard roof rails or is it a 'suck it and see' thing?

Cheers,

F.

Hi, The full roof rack I have fits on the gutter rail and sits above the roof rails,